fix: drive background refresh and phishing update from alarms (closes #158)

The Chrome MV3 service worker is terminated after roughly 30 seconds idle,
which destroyed both recurring jobs: the 60-second balance refresh and the
24-hour phishing blocklist refresh were setInterval schedules, so in
practice each ran only while the worker happened to be alive. The phishing
delta was persisted to localStorage, which does not exist in a service
worker, so on Chrome it was never persisted at all.

Both jobs now run off the extension alarms API in the new
src/shared/alarms.js: the browser holds the schedule and wakes the worker to
deliver it. The balance refresh is one minute and the phishing refresh is
1440 minutes, both whole minutes at or above the one-minute minimum, so
neither is silently clamped. Alarms are created only when missing or when the
existing one carries a different period, because creating one restarts its
period and the startup path runs on every wake — while an alarm left at an
older release's period would otherwise never be reconciled.

Each job's freshness guard is decoupled from its alarm period, or the period
would not be the cadence. A guard is measured from when the last run
finished, which is one run-duration after the alarm that started it, so a
guard timed to the period vetoes the very next tick and the real rate halves.
The two are handled differently because the guards differ in purpose: the
phishing cache TTL exists to keep the worker off the network on the wakes
between refreshes, so the scheduled tick bypasses it and fetches
unconditionally; the balance guard exists to skip work an open popup has
already done, so it must keep applying on the tick and is instead shortened
to half the alarm period — above the popup's 10-second refresh, below the
60-second period.

The phishing delta and the timestamps of the fetch that produced it now live
in extension storage, and updatePhishingList() reloads that record before
deciding whether a fetch is due. A revived worker therefore neither
re-fetches on every wake nor sleeps through an overdue update. A timestamp
read back from storage is discarded if it lies in the future: clock skew or a
restored profile backup would otherwise suppress updates until that time
arrived, permanently, now that the value outlives the worker.

Two timestamps are kept, not one. The 256 KiB cap still drops an oversized
delta together with its freshness claim, but the record of having contacted
the network at all is written regardless — as it is after a failed fetch —
and floors unscheduled retries at one hour. Without it, a list that is
persistently oversized or a fetch that persistently fails means a full
blocklist download on every worker wake, indefinitely.

The startup path (ensureRecurringAlarms plus the phishing list init) is
registered on onInstalled and onStartup as well as running at the top level
of the worker, and is idempotent. The concurrent callers on a fresh install
share one in-flight run rather than racing to create the same alarm, and a
failure is logged instead of becoming an unhandled rejection.

Firefox MV2 has a persistent background page where timers would have
survived, but both browsers are built from one bundle and both take the
alarm path, so there is a single code path; "alarms" is declared in both
manifests.

src/shared/ens.js keeps its localStorage cache and gains a comment recording
that it is popup-only, so it does not get pulled into the worker later.

README.md

@@ -789,8 +789,8 @@ of it.
       plus a "+ Add wallet" button
     - Tracked Tokens: one row per tracked token with an `[x]` remove button,
       plus a "+ Add token" button
-    - Display: "Show tracked tokens with zero balance" checkbox and a Theme
-      selector (System / Light / Dark)
+    - Display: "Show tracked tokens with zero balance" checkbox, "UTC
+      Timestamps" checkbox, and a Theme selector (System / Light / Dark)
     - Network: network selector (Ethereum Mainnet / Sepolia Testnet); switching
       resets the RPC and Blockscout endpoints to that network's defaults
     - Ethereum RPC: endpoint URL input + "Save" button (validated against
@@ -801,7 +801,6 @@ of it.
         - "Hide tokens with fewer than 1,000 holders" checkbox
         - "Hide transactions from detected fraud contracts" checkbox
         - "Hide dust transactions below N gwei" checkbox + threshold input
-        - "UTC Timestamps" checkbox
     - Allowed Sites: list with remove buttons
     - Denied Sites: list with remove buttons
     - About: project link, license, author, version, release date, and the

TODO.md

@@ -48,6 +48,9 @@ undefined identifiers, which is how
   `dist/` is a real directory, so a path with a trailing space or a newline can
   no longer carry a debug marker past the unlisted-bundle check
   ([#223](https://git.eeqj.de/sneak/AutistMask/issues/223)).
+- 2026-08-11: UTC Timestamps checkbox moved from the Token Spam Protection well
+  into Display, next to the theme selector
+  ([#212](https://git.eeqj.de/sneak/AutistMask/issues/212)).
 - 2026-08-11: A dust threshold of `0` now means "hide nothing" instead of
   falling back to the 100,000 gwei default, and every address comparison in
   `src/shared/transactions.js` goes through one case-normalising helper so a
@@ -57,6 +60,10 @@ undefined identifiers, which is how
   from the wallet row in Settings, wiped on leaving the screen and excluded from
   the views the popup can reopen onto
   ([#161](https://git.eeqj.de/sneak/AutistMask/issues/161)).
+- 2026-08-11: Extended-key import hardened — the base58 checksum is now enforced
+  on every xprv and xpub, and a non-master key is refused with an explanation
+  instead of being derived beneath
+  ([#210](https://git.eeqj.de/sneak/AutistMask/issues/210)).
 - 2026-08-11: the balance refresh and the 24-hour phishing list refresh moved
   from `setInterval` to the extension alarms API, with the phishing delta and
   its fetch timestamps persisted to extension storage, so neither job dies with

docs/README.md

@@ -363,16 +363,16 @@ Click the gear icon on the home screen to access settings:
 - **Wallets**: Your wallets, and "+ Add wallet".
 - **Tracked Tokens**: The ERC-20 tokens tracked across all addresses, and "+ Add
   token".
-- **Display**: Toggle whether tracked tokens with zero balance are shown, and
-  choose the theme (System, Light, or Dark).
+- **Display**: Toggle whether tracked tokens with zero balance are shown, switch
+  timestamps to UTC, and choose the theme (System, Light, or Dark).
 - **Network**: Switch between Ethereum Mainnet and Sepolia Testnet. Switching
   resets the RPC and Blockscout endpoints to that network's defaults.
 - **Ethereum RPC**: Change the Ethereum node endpoint. Default is a public RPC.
   You can use your own node for maximum privacy.
 - **Blockscout API**: Change the Blockscout instance used for token balances and
   transaction history. You can use a self-hosted instance.
-- **Token Spam Protection**: Toggle individual scam filters, set the dust
-  transaction threshold, and switch timestamps to UTC.
+- **Token Spam Protection**: Toggle individual scam filters and set the dust
+  transaction threshold.
 - **Allowed Sites / Denied Sites**: View and manage web3 site permissions.
 - **About**: License, author, version, release date, and a link to the commit
   this build came from.

src/popup/index.html

@@ -136,7 +136,9 @@
                 <div id="add-wallet-section-xprv" class="hidden">
                     <p class="mb-2">
                         Paste your extended private key (xprv) below. This will
-                        import the HD wallet and scan for used addresses.
+                        import the HD wallet and scan for used addresses. It
+                        must be the master key for the wallet; an account-level
+                        or child key is not supported.
                     </p>
                     <div class="mb-2">
                         <input
@@ -869,6 +871,12 @@
                         />
                         Show tracked tokens with zero balance
                     </label>
+                    <label
+                        class="text-xs flex items-center gap-1 cursor-pointer mb-2"
+                    >
+                        <input type="checkbox" id="settings-utc-timestamps" />
+                        UTC Timestamps
+                    </label>
                     <div class="text-xs flex items-center gap-1">
                         <label for="settings-theme">Theme:</label>
                         <select
@@ -979,12 +987,6 @@
                         />
                         <span class="text-xs text-muted">gwei</span>
                     </div>
-                    <label
-                        class="text-xs flex items-center gap-1 cursor-pointer mb-1"
-                    >
-                        <input type="checkbox" id="settings-utc-timestamps" />
-                        UTC Timestamps
-                    </label>
                 </div>
 
                 <div class="bg-well p-3 mx-1 mb-3">

src/popup/views/addWallet.js

@@ -6,6 +6,7 @@ const {
     addressFromPrivateKey,
     hdWalletFromXprv,
     isValidXprv,
+    isMasterExtendedKey,
 } = require("../../shared/wallet");
 const { encryptWithPassword } = require("../../shared/vault");
 const { state, saveState } = require("../../shared/state");
@@ -213,14 +214,25 @@ async function importXprvKey(ctx) {
         return;
     }
     if (!isValidXprv(xprv)) {
-        showFlash("Invalid extended private key.");
+        showFlash(
+            "That extended private key is not valid. Please check it and try again.",
+        );
+        return;
+    }
+    if (!isMasterExtendedKey(xprv)) {
+        showFlash(
+            "That is an account-level or child key, which cannot be imported. " +
+                "Please paste the master extended private key for the wallet.",
+        );
         return;
     }
     let result;
     try {
         result = hdWalletFromXprv(xprv);
     } catch (e) {
-        showFlash("Invalid extended private key.");
+        showFlash(
+            "That extended private key is not valid. Please check it and try again.",
+        );
         return;
     }
     const { xpub, firstAddress } = result;

src/shared/wallet.js

@@ -16,8 +16,60 @@ function generateMnemonic() {
     return m.phrase;
 }
 
+// Every extended key (xprv or xpub) entering the app goes through this.
+//
+// ethers' HDNodeWallet.fromExtendedKey does NOT verify the base58 checksum
+// when the decoded payload is the usual 82 bytes, which is exactly the case
+// the checksum exists to catch: a key with a one-character typo parses into a
+// *different* wallet instead of being rejected. Re-encoding the parsed node
+// reproduces a well-formed key byte for byte, checksum included, so comparing
+// the round trip against the input rejects any altered character. Measured by
+// the sweep in tests/wallet.test.js over every single-character substitution
+// of the BIP-32 vector 1 master key: 199 parse without the round-trip
+// comparison, 0 with it.
+//
+// Returns the parsed node, or null if the key is not a well-formed extended
+// key. Callers turn null into a user-facing error; none of them may fall back
+// to fromExtendedKey directly.
+function parseExtendedKey(key) {
+    if (typeof key !== "string") return null;
+    try {
+        const node = HDNodeWallet.fromExtendedKey(key);
+        return node.extendedKey === key ? node : null;
+    } catch {
+        return null;
+    }
+}
+
+// A master key is at depth 0. Only from there is BIP44_ETH_PATH the absolute
+// path it names; deriving it under an account-level or child key yields
+// addresses that correspond to nothing the user holds.
+const MASTER_DEPTH = 0;
+
+// Parse an extended private key that the BIP-44 Ethereum account path can be
+// derived from, or throw. Both callers derive BIP44_ETH_PATH from the result.
+function masterXprvOrThrow(key) {
+    const node = parseExtendedKey(key);
+    if (!node) {
+        throw new Error("Not a valid extended private key (xprv).");
+    }
+    if (!node.privateKey) {
+        throw new Error("Not an extended private key (xprv).");
+    }
+    if (node.depth !== MASTER_DEPTH) {
+        throw new Error(
+            "Not a master extended private key (xprv): an account-level or " +
+                "child key cannot be imported.",
+        );
+    }
+    return node;
+}
+
 function deriveAddressFromXpub(xpub, index) {
-    const node = HDNodeWallet.fromExtendedKey(xpub);
+    const node = parseExtendedKey(xpub);
+    if (!node) {
+        throw new Error("Not a valid extended key.");
+    }
     return node.deriveChild(index).address;
 }
 
@@ -29,23 +81,28 @@ function hdWalletFromMnemonic(mnemonic) {
 }
 
 function hdWalletFromXprv(xprv) {
-    const root = HDNodeWallet.fromExtendedKey(xprv);
-    if (!root.privateKey) {
-        throw new Error("Not an extended private key (xprv).");
-    }
-    const node = root.derivePath("44'/60'/0'/0");
+    // BIP44_ETH_PATH is absolute ("m/..."), which ethers will only derive from
+    // a depth-0 node. The relative form this used to derive would have been
+    // applied *beneath* an account-level key instead of being refused.
+    const node = masterXprvOrThrow(xprv).derivePath(BIP44_ETH_PATH);
     const xpub = node.neuter().extendedKey;
     const firstAddress = node.deriveChild(0).address;
     return { xpub, firstAddress };
 }
 
+// Well-formed extended private key. Says nothing about depth: the import view
+// reports a non-master key separately, since "check it for a typo" is the
+// wrong advice for a key the user copied correctly.
 function isValidXprv(key) {
-    try {
-        const node = HDNodeWallet.fromExtendedKey(key);
-        return !!node.privateKey;
-    } catch {
-        return false;
-    }
+    const node = parseExtendedKey(key);
+    return !!(node && node.privateKey);
+}
+
+// Whether an extended key is a master key, i.e. the one BIP44_ETH_PATH can be
+// derived from. False for anything parseExtendedKey rejects.
+function isMasterExtendedKey(key) {
+    const node = parseExtendedKey(key);
+    return !!node && node.depth === MASTER_DEPTH;
 }
 
 function addressFromPrivateKey(key) {
@@ -63,8 +120,8 @@ function getSignerForAddress(walletData, addrIndex, decryptedSecret) {
         return node.deriveChild(addrIndex);
     }
     if (walletData.type === "xprv") {
-        const root = HDNodeWallet.fromExtendedKey(decryptedSecret);
-        const node = root.derivePath("44'/60'/0'/0");
+        const node =
+            masterXprvOrThrow(decryptedSecret).derivePath(BIP44_ETH_PATH);
         return node.deriveChild(addrIndex);
     }
     return new Wallet(decryptedSecret);
@@ -89,6 +146,7 @@ module.exports = {
     hdWalletFromMnemonic,
     hdWalletFromXprv,
     isValidXprv,
+    isMasterExtendedKey,
     addressFromPrivateKey,
     getSignerForAddress,
     isValidMnemonic,

tests/settingsUtcTimestamps.test.js

@@ -0,0 +1,111 @@
+// Tests for the UTC Timestamps setting.
+//
+// The checkbox was moved out of the Token Spam Protection well and into the
+// Display well next to the theme selector.  It is wired by id through the $()
+// helper, so the move cannot break the handler — but nothing in the suite said
+// so.  These tests pin both halves down: the markup lives in Display and
+// nowhere else, and the value still round-trips through storage.
+
+const fs = require("fs");
+const path = require("path");
+
+const POPUP_HTML = fs.readFileSync(
+    path.join(__dirname, "..", "src", "popup", "index.html"),
+    "utf8",
+);
+
+// The body of one `<div class="bg-well ...">` well, selected by its heading.
+function wellWithHeading(html, heading) {
+    const headingIndex = html.indexOf(
+        '<h3 class="font-bold mb-1">' + heading + "</h3>",
+    );
+    expect(headingIndex).toBeGreaterThan(-1);
+    const start = html.lastIndexOf('<div class="bg-well', headingIndex);
+    const end = html.indexOf('<div class="bg-well', headingIndex);
+    return html.slice(start, end === -1 ? html.length : end);
+}
+
+describe("the UTC Timestamps checkbox placement", () => {
+    test("the checkbox appears exactly once in the popup markup", () => {
+        const matches = POPUP_HTML.match(/id="settings-utc-timestamps"/g);
+        expect(matches).toHaveLength(1);
+    });
+
+    test("it renders in the Display well, alongside the theme selector", () => {
+        const display = wellWithHeading(POPUP_HTML, "Display");
+
+        expect(display).toContain('id="settings-utc-timestamps"');
+        expect(display).toContain('id="settings-theme"');
+    });
+
+    test("it does not render in the Token Spam Protection well", () => {
+        const spam = wellWithHeading(POPUP_HTML, "Token Spam Protection");
+
+        expect(spam).not.toContain('id="settings-utc-timestamps"');
+        // The filters that do belong there are untouched.
+        expect(spam).toContain('id="settings-hide-low-holders"');
+        expect(spam).toContain('id="settings-hide-fraud-contracts"');
+        expect(spam).toContain('id="settings-hide-dust"');
+        expect(spam).toContain('id="settings-dust-threshold"');
+    });
+});
+
+describe("the UTC Timestamps setting round-trips through storage", () => {
+    let store;
+
+    function loadStateModule() {
+        store = {};
+        global.chrome = {
+            storage: {
+                local: {
+                    get: async (key) =>
+                        key in store ? { [key]: store[key] } : {},
+                    set: async (obj) => Object.assign(store, obj),
+                },
+            },
+        };
+        jest.resetModules();
+        return require("../src/shared/state");
+    }
+
+    afterEach(() => {
+        delete global.chrome;
+    });
+
+    test("defaults to off with nothing persisted", async () => {
+        const { state, loadState } = loadStateModule();
+
+        await loadState();
+
+        expect(state.utcTimestamps).toBe(false);
+    });
+
+    test("an enabled checkbox is persisted and read back", async () => {
+        const first = loadStateModule();
+
+        // What the change handler in views/settings.js does.
+        first.state.utcTimestamps = true;
+        await first.saveState();
+        expect(store.autistmask.utcTimestamps).toBe(true);
+
+        // A fresh popup load sees it.
+        jest.resetModules();
+        const second = require("../src/shared/state");
+        expect(second.state.utcTimestamps).toBe(false);
+        await second.loadState();
+        expect(second.state.utcTimestamps).toBe(true);
+    });
+
+    test("turning it back off is persisted too", async () => {
+        const { state, saveState, loadState } = loadStateModule();
+
+        state.utcTimestamps = true;
+        await saveState();
+        state.utcTimestamps = false;
+        await saveState();
+
+        state.utcTimestamps = true;
+        await loadState();
+        expect(state.utcTimestamps).toBe(false);
+    });
+});

tests/wallet.test.js

@@ -160,6 +160,31 @@ function masterXprv(phrase, passphrase = "") {
     ).extendedKey;
 }
 
+// The account-level (depth-3) extended private key m/44'/60'/0' for a phrase.
+// A normal thing for a user to hold, and not something the import flow can
+// derive the BIP-44 account path from.
+function accountXprv(phrase) {
+    return HDNodeWallet.fromSeed(
+        Mnemonic.fromPhrase(phrase, "").computeSeed(),
+    ).derivePath("m/44'/60'/0'").extendedKey;
+}
+
+// Every single-character substitution of `key`, using base58 characters that
+// are not the original. Base58 has no visually ambiguous characters, so each
+// of these is a plausible typo rather than a contrived string.
+const TYPO_CHARS = ["a", "b", "2", "Z"];
+
+function singleCharacterTypos(key) {
+    const out = [];
+    for (let i = 0; i < key.length; i++) {
+        for (const c of TYPO_CHARS) {
+            if (c === key[i]) continue;
+            out.push(key.slice(0, i) + c + key.slice(i + 1));
+        }
+    }
+    return out;
+}
+
 describe("hdWalletFromMnemonic", () => {
     test("first address matches the published vector for m/44'/60'/0'/0/0", () => {
         expect(wallet.hdWalletFromMnemonic(VECTOR_PHRASE).firstAddress).toBe(
@@ -299,19 +324,7 @@ describe("isValidXprv", () => {
         expect(wallet.isValidXprv(xpub)).toBe(false);
     });
 
-    // Skipped: this asserts the correct behaviour, which the code does not
-    // currently have. isValidXprv gates the paste-your-extended-private-key
-    // import in src/popup/views/addWallet.js:215, and it accepts a key with a
-    // one-character typo: ethers' HDNodeWallet.fromExtendedKey skips base58
-    // checksum verification whenever the decoded payload is the usual 82
-    // bytes, which is the whole point of that checksum. Measured on this
-    // vector: changing any one of the last 14 characters passes validation,
-    // and for 9 of those 14 positions the import silently yields a *different*
-    // wallet (e.g. 0x3F334f0a356d6B46B1d70B590E7437D77100d28D instead of
-    // 0x022b971dFF0C43305e691DEd7a14367AF19D6407) with no error shown.
-    // Tracked as https://git.eeqj.de/sneak/AutistMask/issues/210; out of scope
-    // here, which is tests only. Unskip when it is fixed.
-    test.skip("rejects an extended key with a one-character typo", () => {
+    test("rejects an extended key with a one-character typo", () => {
         const index = BIP32_VECTOR_1_XPRV.length - 8;
         const typo =
             BIP32_VECTOR_1_XPRV.slice(0, index) +
@@ -320,6 +333,125 @@ describe("isValidXprv", () => {
 
         expect(wallet.isValidXprv(typo)).toBe(false);
     });
+
+    // The base58 checksum exists to make a mistyped key impossible to use, and
+    // ethers does not enforce it: HDNodeWallet.fromExtendedKey skips checksum
+    // verification whenever the decoded payload is the usual 82 bytes, which
+    // is precisely the case it is there to catch. A typo anywhere in the key
+    // must be refused, not silently turned into someone else's wallet.
+    test("no single-character typo anywhere in the key is accepted", () => {
+        const accepted = singleCharacterTypos(BIP32_VECTOR_1_XPRV).filter(
+            (typo) => wallet.isValidXprv(typo),
+        );
+
+        expect(accepted).toEqual([]);
+    });
+
+    test("a typo never yields a wallet, let alone a different one", () => {
+        const correct = wallet.hdWalletFromXprv(BIP32_VECTOR_1_XPRV);
+        const derived = [];
+        for (const typo of singleCharacterTypos(BIP32_VECTOR_1_XPRV)) {
+            try {
+                derived.push(wallet.hdWalletFromXprv(typo).firstAddress);
+            } catch {
+                // Rejected, which is the required behaviour.
+            }
+        }
+
+        expect(derived).toEqual([]);
+        expect(correct.firstAddress).toBe(
+            "0x022b971dFF0C43305e691DEd7a14367AF19D6407",
+        );
+    });
+});
+
+describe("extended key depth", () => {
+    // hdWalletFromXprv derives the BIP-44 Ethereum account path from the key
+    // it is given. That is only the path it names when the key is the master
+    // key. Under an account-level key the same derivation lands at
+    // m/44'/60'/0'/44'/60'/0'/0, whose addresses correspond to nothing the
+    // user holds, so a non-master key is refused rather than derived from.
+    test("a master key is a master key", () => {
+        expect(wallet.isMasterExtendedKey(masterXprv(VECTOR_PHRASE))).toBe(
+            true,
+        );
+        expect(wallet.isMasterExtendedKey(BIP32_VECTOR_1_XPRV)).toBe(true);
+    });
+
+    test("an account-level key is not a master key", () => {
+        expect(wallet.isMasterExtendedKey(accountXprv(VECTOR_PHRASE))).toBe(
+            false,
+        );
+    });
+
+    test("a derived xpub is not a master key", () => {
+        expect(
+            wallet.isMasterExtendedKey(
+                wallet.hdWalletFromMnemonic(VECTOR_PHRASE).xpub,
+            ),
+        ).toBe(false);
+    });
+
+    test("a mistyped key is not a master key either", () => {
+        expect(wallet.isMasterExtendedKey(BIP32_VECTOR_1_XPRV + "a")).toBe(
+            false,
+        );
+    });
+
+    test("hdWalletFromXprv rejects an account-level key", () => {
+        expect(() =>
+            wallet.hdWalletFromXprv(accountXprv(VECTOR_PHRASE)),
+        ).toThrow(/master/i);
+    });
+
+    test("getSignerForAddress rejects an account-level key", () => {
+        expect(() =>
+            wallet.getSignerForAddress(
+                { type: "xprv" },
+                0,
+                accountXprv(VECTOR_PHRASE),
+            ),
+        ).toThrow(/master/i);
+    });
+
+    test("the account-level key is well-formed, so only depth rejects it", () => {
+        expect(wallet.isValidXprv(accountXprv(VECTOR_PHRASE))).toBe(true);
+    });
+
+    test("a master key still imports and derives the published addresses", () => {
+        const { xpub, firstAddress } = wallet.hdWalletFromXprv(
+            masterXprv(VECTOR_PHRASE),
+        );
+
+        expect(firstAddress).toBe(VECTOR_ADDRESSES[0]);
+        expect(
+            [0, 1, 2].map((i) => wallet.deriveAddressFromXpub(xpub, i)),
+        ).toEqual(VECTOR_ADDRESSES);
+    });
+});
+
+describe("deriveAddressFromXpub checksum enforcement", () => {
+    // The xpub path shares the hole: fromExtendedKey accepts a mistyped xpub
+    // just as readily, and deriveAddressFromXpub would hand back addresses
+    // from a different tree.
+    const { xpub } = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+
+    test("the correct xpub still derives the published addresses", () => {
+        expect(wallet.deriveAddressFromXpub(xpub, 0)).toBe(VECTOR_ADDRESSES[0]);
+    });
+
+    test("no single-character typo anywhere in an xpub is accepted", () => {
+        const derived = [];
+        for (const typo of singleCharacterTypos(xpub)) {
+            try {
+                derived.push(wallet.deriveAddressFromXpub(typo, 0));
+            } catch {
+                // Rejected, which is the required behaviour.
+            }
+        }
+
+        expect(derived).toEqual([]);
+    });
 });
 
 describe("isValidMnemonic", () => {