fix: a swap's WETH minimum reads as ETH only when all its WETH reaches the UNWRAP_WETH (closes #642)

Between the step that set the output side and the UNWRAP_WETH, only a
step the decoder read that is a PERMIT2_PERMIT, a BALANCE_CHECK_ERC20,
or a SWEEP, TRANSFER, PAY_PORTION or PAY_PORTION_FULL_PRECISION of a
token other than WETH, and not of ETH to a WETH contract, keeps the
swap's WETH minimum as an ETH minimum; any other step leaves ETH with no
minimum. After an UNWRAP_WETH whose recipient is the router or cannot be
read, any later step but those makes the swap read WETH with no minimum.
Only a step that sets the output side again brings back ETH or a
minimum. A WETH fee paid by PAY_PORTION before the UNWRAP_WETH now shows
no minimum. README Display Consistency states the same rule.

Model: opus-5-5

README.md

@@ -1260,17 +1260,29 @@ runs (Transaction Decoding below gives what the router holds). The router
 unwraps only the WETH it holds, so WETH that step paid to the user, or to anyone
 else, stays WETH: a swap that pays the router WETH, then a swap that pays the
 user WETH, then an unwrap, shows WETH with the second swap's minimum. The
-minimum reads in ETH when that step paid all its WETH to the router. When it
+minimum reads in ETH only when that step paid all its WETH to the router and
-paid only part of it to the router, as a V4 step does that `TAKE`s some of its
+every step between it and the `UNWRAP_WETH` is one the decoder read of these: a
-WETH to the user and the rest to the router, or paid the router WETH beside a
+`PERMIT2_PERMIT`, a `BALANCE_CHECK_ERC20`, or a `SWEEP`, `TRANSFER`,
-payout the decoder cannot read, the swap shows ETH with no minimum: the decoder
+`PAY_PORTION` or `PAY_PORTION_FULL_PRECISION` of a token other than WETH, but
-does not count how much of that step's minimum reaches the router, nor read the
+not of ETH to a WETH contract, which pays the router WETH. None of these can
-`UNWRAP_WETH`'s own minimum. A later step that sets the output side sets it
+take WETH out of the router or pay anyone WETH; the decoder treats every other
-anew. Otherwise `Token Out` and `Min. received` keep the output side's own token
+step as one that may. Otherwise the swap shows ETH with no minimum, as it does
-and figure, whether the swap was paid in ETH or in a token: a V2 exact-out swap
+after a V4 step that `TAKE`s some of its WETH to the user and the rest to the
-that buys USDC and then unwraps the WETH it did not spend shows USDC. The token
+router, or that pays the router WETH beside a payout the decoder cannot read,
-permission warning on the signature screen has its own amount wording, including
+and with a WETH interface fee paid by `PAY_PORTION` before the `UNWRAP_WETH`:
-`Unknown`; the SignApproval section below describes it.
+the decoder does not count how much of that step's minimum reaches the
+`UNWRAP_WETH`, nor read the `UNWRAP_WETH`'s own minimum. When an `UNWRAP_WETH`
+of that WETH pays the router, or its recipient cannot be read, the router may
+hold the ETH, and a later step may pay it out as WETH, as a `WRAP_ETH` of it to
+the user does: after any later step but those listed, the swap shows WETH with
+no minimum. Once the swap shows no minimum, or shows WETH this way, no later
+step, a later `UNWRAP_WETH` included, brings back the minimum or ETH; only a
+later step that sets the output side sets it anew. Otherwise `Token Out` and
+`Min. received` keep the output side's own token and figure, whether the swap
+was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
+unwraps the WETH it did not spend shows USDC. The token permission warning on
+the signature screen has its own amount wording, including `Unknown`; the
+SignApproval section below describes it.
 
 The swap's `Deadline` line is the router's deadline as a UTC date and time, e.g.
 `2026-02-27 08:25:51`. A JavaScript date reaches only to 275760-09-13 00:00:00
@@ -1389,6 +1401,19 @@ carries a `schemaVersion` — `STATE_SCHEMA_VERSION` in
 `saveState()` and the background's `updateState()` both do, so whichever context
 wrote last, the record says which build's shape it is in.
 
+Each write reads the record, changes it and writes it back, holding a lock from
+the read to the write: the browser's own (`navigator.locks`), taken through
+`withLock()` in `src/shared/browserApi.js`. Every page of the extension and its
+background share it, except a page in a Firefox private window, which Firefox
+gives locks of its own (see https://git.eeqj.de/sneak/AutistMask/issues/646).
+The popup's `saveState()`, the background's `updateState()` and the
+StateRecovery reset all take it, so among the pages and the background that
+share it, no write lands between another write's read and its write, where it
+would be lost. Chrome has it from version 69, older than any Chrome that runs a
+Manifest V3 extension, in pages and in the service worker; Firefox from version
+96, older than the 115 `manifest/firefox.json` declares. Where it is missing, a
+write fails rather than going ahead without it.
+
 Version 1 is the shape that shipped before versions existed, so a stored record
 with no `schemaVersion` is version 1 rather than a defect: it loads normally and
 is migrated in place by being stamped on the first write. An upgrade never shows

package.json

@@ -13,6 +13,11 @@
         "fmt": "prettier --write .",
         "fmt-check": "prettier --check ."
     },
+    "jest": {
+        "setupFiles": [
+            "<rootDir>/tests/support/navigatorLocks.js"
+        ]
+    },
     "devDependencies": {
         "@eslint/js": "10.0.1",
         "@tailwindcss/cli": "4.3.1",

src/background/state.js

@@ -16,17 +16,20 @@
 //                     across any number of awaits and no concurrent work can
 //                     move it.
 //   updateState(fn)   read fresh, apply fn to that fresh record, write it
-//                     back — all inside a queue, so two background writes
+//                     back — all holding the lock every write of the stored
-//                     never interleave, and the read is one storage round trip
+//                     record takes, so no other write lands in between, by
-//                     ahead of the write rather than a page lifetime ahead of
+//                     the background or by any page except a page in a
-//                     it (which is what made the popup's saveState() need a
+//                     Firefox private window (README, "Stored state and its
+//                     version"). The read is one storage round trip ahead of
+//                     the write rather than a page lifetime ahead of it
+//                     (which is what made the popup's saveState() need a
 //                     per-field merge against a baseline at all).
 //
 // A handler that must both read and write therefore does its network work
 // against a snapshot it owns, and applies the RESULT inside updateState().
 // It never publishes an object other in-flight work is holding.
 
-const { storageGet, storageSet } = require("../shared/browserApi");
+const { storageGet, storageSet, withLock } = require("../shared/browserApi");
 const { normalizePersisted } = require("../shared/persistedState");
 const {
     STATE_SCHEMA_VERSION,
@@ -51,11 +54,6 @@ async function getState() {
     return normalizePersisted(result.autistmask);
 }
 
-// Serializes the read-modify-write turns below. Two of them interleaved would
-// each read before the other wrote, and the second write would carry the first
-// one's fields back to their pre-turn values.
-let updateQueue = Promise.resolve();
-
 async function updateStateOnce(mutate) {
     const s = await getState();
     await mutate(s);
@@ -70,27 +68,22 @@ async function updateStateOnce(mutate) {
 
 // Apply `mutate` to a record read fresh from storage and write the result
 // back. `mutate` receives a detached, normalized profile and mutates it in
-// place; it may be async, but it must not do anything slow — the window
+// place; it may be async, but it must not do anything slow. The write is the
-// between the read and the write is the window in which another context's
+// WHOLE record, which is safe only because the lock (withLock() in
-// write is lost, and keeping it to one storage round trip is what makes a
+// src/shared/browserApi.js) is held from the read to the write: two
-// whole-record write safe here. Concretely: the write is the WHOLE record, so
+// background turns, or a turn and a page's save, never interleave
-// a popup write that lands inside that window is reverted, in every field, by
+// (https://git.eeqj.de/sneak/AutistMask/issues/641). Every page's save waits
-// the record this turn read before it. That is accepted because the window is
+// while it is held, except a page in a Firefox private window, which Firefox
-// one round trip long and the popup is not writing while the worker is;
+// gives locks of its own (README, "Stored state and its version").
-// widening it is what would make it a real hazard.
 //
 // `mutate` must also not call updateState() itself, directly or through
-// anything it awaits: the queue is strictly serial, so the inner turn waits on
+// anything it awaits: the inner turn waits for the lock the outer one holds,
-// the outer one, which is waiting on the inner one. That deadlocks the whole
+// and the outer one is waiting on the inner one. That deadlocks every write of
-// background, not just the caller. Mutate the record you were handed.
+// the stored record, not just the caller. Mutate the record you were handed.
 //
 // Resolves with the record that was written.
 function updateState(mutate) {
-    const turn = updateQueue.then(() => updateStateOnce(mutate));
+    return withLock("autistmask", () => updateStateOnce(mutate));
-    // The queue must advance even when a turn rejects, or every update after
-    // it queues behind a promise that never settles.
-    updateQueue = turn.catch(() => {});
-    return turn;
 }
 
 module.exports = { getState, updateState };

src/popup/index.js

@@ -220,7 +220,7 @@ async function widenApprovalWindow() {
 async function init() {
     // First, before anything can save: showView() saves on every navigation
     // without awaiting, so a save that fails from here on has somewhere to be
-    // reported rather than being swallowed by the save queue
+    // reported rather than reaching only the console
     // (https://git.eeqj.de/sneak/AutistMask/issues/362). Registered ahead of
     // the approval-window branch below too, since that window saves as well.
     //

src/popup/views/stateRecovery.js

@@ -24,7 +24,11 @@
 // than written again locally so that tests/popupElementIds.test.js sees these
 // lookups and holds every id below against the markup.
 const { $, VIEWS } = require("./helpers");
-const { storageGet, storageRemove } = require("../../shared/browserApi");
+const {
+    storageGet,
+    storageRemove,
+    withLock,
+} = require("../../shared/browserApi");
 const { log } = require("../../shared/log");
 
 // Typed in full before anything is erased, in the same spirit as the wallet
@@ -137,7 +141,11 @@ async function resetProfile() {
         return;
     }
     try {
-        await storageRemove("autistmask");
+        // Under the lock every write of the stored record takes, so the erase
+        // cannot land between another write's read and its write and be undone.
+        // A page in a Firefox private window is the exception: Firefox gives
+        // it locks of its own (README, "Stored state and its version").
+        await withLock("autistmask", () => storageRemove("autistmask"));
     } catch (e) {
         log.errorf("state recovery: reset failed:", e);
         setFlash("The saved data could not be erased. Nothing was changed.");

src/shared/browserApi.js

@@ -31,6 +31,11 @@
 // Everything is resolved on use rather than captured at module load. The MV3
 // service worker is torn down and re-evaluated repeatedly, and the unit
 // suite installs its stubs on `global.chrome` around a require().
+//
+// The module also holds withLock(), a wrapper around the browser's
+// `navigator.locks`, which is in neither namespace. It sits beside
+// storageGet() and storageSet() because every write of the stored record
+// takes it.
 
 // The extension API namespace, preferring `browser.*` where it exists.
 //
@@ -219,6 +224,33 @@ function storageRemove(keys) {
     return Promise.resolve(storage.remove(keys));
 }
 
+/**
+ * Run `fn` while holding the browser's lock called `name`
+ * (`navigator.locks`), and settle as `fn` settles. Every page of the extension
+ * and its background share these locks, except a page in a Firefox private
+ * window (README, "Stored state and its version"), so while one of them holds
+ * `name` another asking for it waits, in the order they asked. The lock is let
+ * go when `fn` settles, whether it resolved or rejected.
+ *
+ * Every write of the stored record holds the lock named after its key,
+ * "autistmask", from its read to its write: saveState() in
+ * src/shared/state.js, updateState() in src/background/state.js, and the
+ * reset in src/popup/views/stateRecovery.js.
+ *
+ * @param {string} name
+ * @param {function(): Promise<*>} fn
+ * @returns {Promise<*>} what `fn` resolved with.
+ * @throws rejects, without running `fn`, where `navigator.locks` is absent.
+ */
+function withLock(name, fn) {
+    if (typeof navigator === "undefined" || !navigator.locks) {
+        return Promise.reject(
+            new Error("navigator.locks is not available in this context"),
+        );
+    }
+    return navigator.locks.request(name, () => fn());
+}
+
 // `storage.session`, the browser's session storage: what is kept there lasts
 // until the browser closes. It survives the background worker being stopped
 // and started again, which module-level variables do not (README, Background
@@ -373,4 +405,5 @@ module.exports = {
     windowsGetLastFocused,
     windowsRemove,
     windowsUpdate,
+    withLock,
 };

src/shared/state.js

@@ -35,7 +35,7 @@ const {
     migrationNeeded,
 } = require("./stateSchema");
 
-const { storageGet, storageSet } = require("./browserApi");
+const { storageGet, storageSet, withLock } = require("./browserApi");
 const { log } = require("./log");
 
 // The live record the proxy below guards. Everything inside this module reads
@@ -458,8 +458,8 @@ function mergeNetworkEndpoints(base, ours, theirs) {
 // This page's own live `state` is deliberately NOT rehydrated from a field
 // another page changed — only the record written to storage is merged.
 // showView() fires saveState() on every navigation without awaiting it,
-// which is what makes the queue above necessary in the first place, and a
+// which is why saves from one page wait for each other (see saveState()), and
-// save that is slow to come back has no way to tell whether the field it
+// a save that is slow to come back has no way to tell whether the field it
 // is about to hand back is still the current answer or has since been
 // overtaken by something this very page did in the meantime; writing it
 // into `state` regardless reintroduced exactly the clobber this function
@@ -529,35 +529,21 @@ async function saveStateOnce() {
     rawState.hasWallet = rawState.wallets.length > 0;
 
     // What this save compared and wrote, not the page's state now: a change
-    // made during the save must still differ from the baseline, or the save
+    // made during the save must still differ from the baseline, or the next
-    // queued after it finds nothing to store
+    // save finds nothing to store
     // (https://git.eeqj.de/sneak/AutistMask/issues/448).
     baseline = current;
 }
 
-// showView() calls saveState() on every navigation without awaiting it, so
-// two saves from the SAME page can be in flight at once — e.g. a screen
-// shown, then immediately replaced before the first save's storageGet()
-// round trip has come back. Left concurrent, the first save's turn would
-// finish after the second's live-state mutation and then re-hydrate `state`
-// from what IT read, stomping the second, later change back to a stale
-// value — the same clobber this function exists to prevent, just between
-// two saves on one page instead of two pages. Queuing makes every save's
-// snapshot-diff-write-rehydrate run start to finish before the next one
-// begins, so each one only ever sees the true live state at its turn.
-let saveQueue = Promise.resolve();
-
 // Where a failed save is REPORTED, set once by the context that has a screen
 // to say it on (src/popup/index.js).
 //
 // A save that fails must not fail silently. showView() fires saveState() on
-// every navigation without awaiting it, and the queue below has to attach a
+// every navigation without awaiting it, and `await saveState()` inside an
-// rejection handler to keep advancing — so a failing save was swallowed
+// unguarded event handler is no better: either way, without this, a failure
-// entirely: no throw, no message, nothing on screen. The wallet kept running
+// would reach only the console, where the user never looks, and the wallet
-// against storage that was rejecting every write, which is the data-loss half
+// would keep running against storage that rejects every write. That is the
-// of https://git.eeqj.de/sneak/AutistMask/issues/362. The awaited callers were
+// data-loss half of https://git.eeqj.de/sneak/AutistMask/issues/362.
-// no better off: `await saveState()` inside an unguarded event handler surfaces
-// in the console and nowhere the user looks.
 //
 // This is the "tell the user" half; the other half is the floor in
 // normalizePersisted(), which stops the malformed-record cause from arising in
@@ -583,11 +569,20 @@ function reportSaveFailure(err) {
     }
 }
 
+// Each save runs start to finish holding the lock every write of the stored
+// record takes (withLock() in src/shared/browserApi.js), so no write by
+// another page or the background lands between its read and its write and is
+// lost (https://git.eeqj.de/sneak/AutistMask/issues/641). A page in a Firefox
+// private window is the exception: Firefox gives it locks of its own (README,
+// "Stored state and its version").
+//
+// The same lock orders this page's own saves. showView() calls saveState() on
+// every navigation without awaiting it, so two saves from one page can be
+// asked for at once; they take the lock in the order they were asked, and each
+// compares the page's state as it stands when its turn begins against the
+// baseline the save before it left.
 function saveState() {
-    const turn = saveQueue.then(saveStateOnce);
+    const turn = withLock("autistmask", saveStateOnce);
-    // The queue must advance even when a save rejects, or every save after
-    // it queues behind a promise that never settles.
-    saveQueue = turn.catch(() => {});
     // Every failed save is reported, whether or not the caller awaited this
     // one. The returned promise still rejects, so a caller that DOES await
     // keeps its own error handling.

src/shared/uniswap.js

@@ -1221,8 +1221,23 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         let hasUnwrapWeth = false;
         // Set when an UNWRAP_WETH pays out, as ETH, the output side's WETH,
         // which the router holds; cleared whenever the output side is set
-        // again.
+        // again, or a later step may pay that ETH out as WETH (see after the
+        // loop). `unwrapIntoRouterStep` is the index of the first such
+        // UNWRAP_WETH that may have paid the ETH to the router, which then
+        // holds it: its recipient is the router or cannot be read. A later
+        // UNWRAP_WETH does not replace it. It is null when there is none, and
+        // is cleared with `outputUnwrapped` when the output side is set again.
         let outputUnwrapped = false;
+        let unwrapIntoRouterStep = null;
+        // The index of the step that set the output side.
+        let outputStep = -1;
+        // The index of the last step this decoder treats as one that may take
+        // WETH out of the router or pay anyone WETH: any step but one it read
+        // that is a PERMIT2_PERMIT, a BALANCE_CHECK_ERC20, or a SWEEP,
+        // TRANSFER, PAY_PORTION or PAY_PORTION_FULL_PRECISION of a token
+        // other than WETH, and not of ETH to a WETH contract, which pays the
+        // router WETH (see keepsRouterWeth in the loop). None of those can.
+        let lastWethStep = -1;
         // Where the step that set the output side paid its output: the
         // recipient of a swap step, as written, or of each TAKE, TAKE_ALL and
         // TAKE_PORTION of it in a V4 step, a TAKE_ALL as paid to the sender,
@@ -1265,13 +1280,15 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             if (!present(token) && !present(amount)) return;
             setInput(token, amount);
         };
-        const setOutput = (token, amount, recipients) => {
+        const setOutput = (step, token, amount, recipients) => {
             if (!present(token) && !present(amount)) return;
             outputToken = present(token) ? token : null;
             minOutput = present(amount) ? amount : null;
             outputEstablished = true;
             outputUnwrapped = false;
+            unwrapIntoRouterStep = null;
             outputRecipients = recipients;
+            outputStep = step;
         };
 
         // What the steps take from the sender beyond the amount of the step
@@ -1405,6 +1422,14 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     v2PairFor(chainId, next.path[0], next.path[1]).toLowerCase()
             );
         };
+        // Whether a SWEEP, TRANSFER, PAY_PORTION or PAY_PORTION_FULL_PRECISION
+        // of `token` to `recipient` pays anyone WETH (see lastWethStep): it
+        // does when `token` is WETH, and when it pays ETH to a WETH contract,
+        // which pays the router WETH for it.
+        const paysWeth = (token, recipient) =>
+            WETH_ADDRESSES.includes(token.toLowerCase()) ||
+            (token === "0x0000000000000000000000000000000000000000" &&
+                WETH_ADDRESSES.includes(recipient.toLowerCase()));
 
         for (let i = 0; i < commandsBytes.length; i++) {
             const cmdId = commandsBytes[i] & commandTypeMask;
@@ -1421,6 +1446,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     ? COMMAND_NAMES[command]
                     : "Command 0x" + cmdId.toString(16).padStart(2, "0"),
             );
+            // Set by a branch below that reads a step that cannot take WETH
+            // out of the router or pay anyone WETH (see lastWethStep).
+            let keepsRouterWeth = false;
 
             try {
                 if (command === "EXECUTE_SUB_PLAN") {
@@ -1452,6 +1480,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                             allowedToFail,
                             beforeEveryTake: !tookBefore,
                         };
+                        keepsRouterWeth = true;
                     } else {
                         stepsUnread.push(i);
                     }
@@ -1507,6 +1536,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         // what the user receives: it sets no side, and the
                         // step says so.
                         commandNames[i] += " (of another address)";
+                        keepsRouterWeth = true;
                     } else {
                         // The router passes this check whenever the owner
                         // holds at least minBalance, so a zero one guarantees
@@ -1517,8 +1547,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         // does. It pays nobody.
                         const minBalance = allowedToFail ? 0n : b.minBalance;
                         if (!(minBalance === 0n && present(minOutput))) {
-                            setOutput(b.token, minBalance, []);
+                            setOutput(i, b.token, minBalance, []);
                         }
+                        keepsRouterWeth = true;
                     }
                 } else if (command === "V3_SWAP_EXACT_IN") {
                     const s = decodeV3SwapExactIn(inputs[i]);
@@ -1531,7 +1562,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         // Always update output: in multi-step swaps (V3 → V4),
                         // the last swap step determines the final output token
                         // and minimum received amount.
-                        setOutput(s.tokenOut, s.amountOutMin, [s.recipient]);
+                        setOutput(i, s.tokenOut, s.amountOutMin, [s.recipient]);
                         if (!s.payerIsUser) {
                             spendFromRouter(s.tokenIn, s.amountIn);
                         }
@@ -1551,7 +1582,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountIn);
                         }
-                        setOutput(s.tokenOut, s.amountOutMin, [s.recipient]);
+                        setOutput(i, s.tokenOut, s.amountOutMin, [s.recipient]);
                         if (!s.payerIsUser) {
                             spendFromRouter(s.tokenIn, s.amountIn);
                         }
@@ -1582,7 +1613,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountInMax);
                         }
-                        setOutput(s.tokenOut, s.amountOut, [s.recipient]);
+                        setOutput(i, s.tokenOut, s.amountOut, [s.recipient]);
                         if (!isHop(i, s.tokenOut, s.recipient)) {
                             addPayee(s.recipient, s.tokenOut);
                         }
@@ -1604,6 +1635,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         if (!isRouter(s.recipient)) {
                             heldByRouter.delete(s.token.toLowerCase());
                         }
+                        keepsRouterWeth = !paysWeth(s.token, s.recipient);
                     } else {
                         payeeUnread = true;
                         stepsUnread.push(i);
@@ -1641,6 +1673,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         ) {
                             heldByRouter.delete(t.token.toLowerCase());
                         }
+                        keepsRouterWeth = !paysWeth(t.token, t.recipient);
                     } else {
                         payeeUnread = true;
                         stepsUnread.push(i);
@@ -1765,14 +1798,21 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         minOutput = v4.amountOutMin;
                         outputEstablished = true;
                         outputUnwrapped = false;
+                        unwrapIntoRouterStep = null;
                         outputRecipients = takeRecipients;
+                        outputStep = i;
                     } else if (v4) {
                         // A step with no swap action sets only the sides its
                         // SETTLE, SETTLE_ALL, TAKE or TAKE_ALL names:
                         // setInputOnce() and setOutput() leave alone a side
                         // whose two halves are both unstated.
                         setInputOnce(v4.tokenIn, amountIn);
-                        setOutput(v4.tokenOut, v4.amountOutMin, takeRecipients);
+                        setOutput(
+                            i,
+                            v4.tokenOut,
+                            v4.amountOutMin,
+                            takeRecipients,
+                        );
                     }
                     // Every V4 step, with a swap action or without, takes
                     // from the sender what the user pays it (an amount an
@@ -1799,12 +1839,17 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     // among it when the step that set the output side paid it
                     // to the router and the router still holds WETH. WETH
                     // that step paid to the user, or to anyone else, stays
-                    // WETH, so when that step also paid some of its output
+                    // WETH. When that step also paid some of its output
-                    // elsewhere, or made a payout this decoder did not read,
+                    // elsewhere or made a payout this decoder did not read,
-                    // only part of it may be unwrapped. This decoder does not
+                    // or this decoder treats a step between the two as one
-                    // count how much of that step's minimum then reaches the
+                    // that may take WETH out of the router or pay anyone WETH
-                    // router, nor read the UNWRAP_WETH's own minimum, so the
+                    // (see lastWethStep), the WETH unwrapped may be only part
-                    // output side keeps no figure.
+                    // of the output side's, or none of it.
+                    // This decoder does not count how much of that step's
+                    // minimum then reaches the UNWRAP_WETH, nor read the
+                    // UNWRAP_WETH's own minimum, so the output side keeps no
+                    // figure.
+                    const u = decodeUnwrapWeth(inputs[i]);
                     const toRouter = (r) => present(r) && isRouter(r);
                     if (
                         present(outputToken) &&
@@ -1813,11 +1858,19 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         outputRecipients.some(toRouter)
                     ) {
                         outputUnwrapped = true;
-                        if (!outputRecipients.every(toRouter)) {
+                        if (
+                            unwrapIntoRouterStep === null &&
+                            (u === null || isRouter(u.recipient))
+                        ) {
+                            unwrapIntoRouterStep = i;
+                        }
+                        if (
+                            !outputRecipients.every(toRouter) ||
+                            lastWethStep > outputStep
+                        ) {
                             minOutput = null;
                         }
                     }
-                    const u = decodeUnwrapWeth(inputs[i]);
                     if (u) {
                         addPayee(u.recipient);
                         // It pays out all the router's WETH, as ETH. Into the
@@ -1854,6 +1907,26 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             if (allowedToFail) {
                 commandNames[i] += " (allowed to fail)";
             }
+            if (!keepsRouterWeth) {
+                lastWethStep = i;
+            }
+        }
+
+        // After an UNWRAP_WETH that may have paid the output side's WETH to
+        // the router as ETH, a later step may pay that ETH out as WETH, as a
+        // WRAP_ETH of it to the user does. This decoder treats every later
+        // step but those lastWethStep names as one that may, and does not
+        // count how much of that ETH each pays out: after one, the output
+        // side reads as WETH with no figure. Neither this nor the loss of the
+        // figure in the UNWRAP_WETH branch is undone by any later step, a
+        // later UNWRAP_WETH included, but one that sets the output side again.
+        if (
+            outputUnwrapped &&
+            unwrapIntoRouterStep !== null &&
+            lastWethStep > unwrapIntoRouterStep
+        ) {
+            outputUnwrapped = false;
+            minOutput = null;
         }
 
         // The Amount line, and the lines for what the steps take beyond it.

tests/confirmTxAmount.test.js

@@ -158,7 +158,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const {
     Interface,

tests/confirmTxNetworkSwitch.test.js

@@ -189,7 +189,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const {
     BaseWallet,

tests/e2e/run.js

@@ -367,11 +367,14 @@ async function leaveTransactionDetail(page) {
     await openAddressDetail(page);
 }
 
-// Back out to Home from wherever the previous test finished.
+// Back out to Home from wherever the previous test finished, and wait for the
+// save that navigation makes, so a test reading the stored stack next reads
+// the one Home left.
 async function goHome(page) {
     await leaveTransactionDetail(page);
     await page.click("#btn-address-back");
     await visible(page, "#view-main");
+    await waitForPersisted(page, "currentView", "main", "back on Home");
 }
 
 // One field of the popup's state as it was actually persisted, read out of

tests/nativeCurrency.test.js

@@ -151,7 +151,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const { state } = require("../src/shared/state");
 const { NETWORKS } = require("../src/shared/networks");

tests/persistedEntryFloors.test.js

@@ -364,7 +364,7 @@ describe("a save that fails", () => {
         return storage;
     }
 
-    test("is reported, not swallowed by the save queue", async () => {
+    test("is reported when the caller does not await it", async () => {
         const storage = failingStorage(unversionedValidProfile());
         const { state, loadState, saveState, onSaveFailure } =
             loadStateModule(storage);

tests/sendAmountRule.test.js

@@ -97,7 +97,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const { state } = require("../src/shared/state");
 const send = require("../src/popup/views/send");

tests/sendDisplayFloor.test.js

@@ -151,7 +151,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const { refreshBalances } = require("../src/shared/balances");
 const { state } = require("../src/shared/state");

tests/sendMax.test.js

@@ -146,7 +146,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const { Transaction, Wallet, formatEther } = require("ethers");
 const { refreshBalances } = require("../src/shared/balances");

tests/stateMerge.test.js

@@ -160,7 +160,7 @@ describe("the approval-window reproduction", () => {
         await approvalWindow.state.loadState();
         approvalWindow.helpers.showView("approve-tx");
         // showView() does not await its own saveState(); an extra save
-        // joins the same queue and only resolves once that one has too,
+        // waits for the lock behind that one and so resolves only after it,
         // which is the black-box way to know it landed.
         await approvalWindow.state.saveState();
 

tests/stateWriteLock.test.js

@@ -0,0 +1,96 @@
+// A popup save reads the stored record, merges this page's changes into it
+// and writes it back. The background's write of a network the user approved
+// used to be able to land between that read and that write, and the popup's
+// write then put the old network back
+// (https://git.eeqj.de/sneak/AutistMask/issues/641). Every write of the record
+// now holds a lock from its read to its write.
+//
+// The popup and the background run here as the real modules over one shared
+// storage stub, and share the lock the way the background and a page outside
+// a Firefox private window share the browser's
+// (tests/support/navigatorLocks.js).
+
+const { makeStorageStub } = require("./support/storageStub");
+
+function loadContexts(storage) {
+    jest.resetModules();
+    globalThis.chrome = { storage: { local: storage.local } };
+    return {
+        popup: require("../src/shared/state"),
+        background: require("../src/background/state"),
+        applyChainSwitchFields: require("../src/shared/chainSwitchFields")
+            .applyChainSwitchFields,
+    };
+}
+
+// Lets every pending promise callback run, and then some.
+function nextMacrotask() {
+    return new Promise((resolve) => setImmediate(resolve));
+}
+
+afterEach(() => {
+    delete globalThis.chrome;
+    jest.restoreAllMocks();
+});
+
+test("a network the background switches to during a popup save stays stored", async () => {
+    const storage = makeStorageStub({ autistmask: { networkId: "sepolia" } });
+    const { popup, background, applyChainSwitchFields } = loadContexts(storage);
+    await popup.loadState();
+
+    // The popup navigates, so its save has a change of its own to write.
+    popup.state.currentView = "settings";
+
+    // The popup's save has read the record and is about to write it back when
+    // the user's approval of a site's switch to mainnet reaches the
+    // background. Without the lock the background's whole update runs before
+    // the next macrotask; with it, the update waits for the popup's write.
+    let backgroundSwitch;
+    const realSet = storage.local.set.getMockImplementation();
+    storage.local.set.mockImplementationOnce(async (items) => {
+        backgroundSwitch = background.updateState((fresh) =>
+            applyChainSwitchFields(fresh, "mainnet"),
+        );
+        await nextMacrotask();
+        return realSet(items);
+    });
+
+    await popup.saveState();
+    await backgroundSwitch;
+
+    const stored = storage.read("autistmask");
+    expect(stored.networkId).toBe("mainnet");
+    expect(stored.currentView).toBe("settings");
+});
+
+test("after a save that failed, the next save still keeps a network the background switches to during it", async () => {
+    jest.spyOn(console, "error").mockImplementation(() => {});
+    const storage = makeStorageStub({ autistmask: { networkId: "sepolia" } });
+    const { popup, background, applyChainSwitchFields } = loadContexts(storage);
+    await popup.loadState();
+    popup.state.currentView = "settings";
+
+    // The first save's write is refused, so it gives the lock back having
+    // failed.
+    storage.local.set.mockRejectedValueOnce(new Error("quota exceeded"));
+    await expect(popup.saveState()).rejects.toThrow("quota exceeded");
+
+    // The next save is between its read and its write when the background
+    // switches to mainnet, as in the test above.
+    let backgroundSwitch;
+    const realSet = storage.local.set.getMockImplementation();
+    storage.local.set.mockImplementationOnce(async (items) => {
+        backgroundSwitch = background.updateState((fresh) =>
+            applyChainSwitchFields(fresh, "mainnet"),
+        );
+        await nextMacrotask();
+        return realSet(items);
+    });
+
+    await popup.saveState();
+    await backgroundSwitch;
+
+    const stored = storage.read("autistmask");
+    expect(stored.networkId).toBe("mainnet");
+    expect(stored.currentView).toBe("settings");
+});

tests/support/navigatorLocks.js

@@ -0,0 +1,27 @@
+// `navigator.locks` for the unit tests, which run on node, where there is none.
+//
+// One lock per name: granted in the order it was asked for, and let go when
+// the callback settles, whether it resolved or rejected. That is what the
+// browser's own does for the one call the extension makes,
+// `navigator.locks.request(name, callback)`. Every module a test file loads
+// shares it, as the extension's background and its pages share the browser's,
+// except a page in a Firefox private window (README, "Stored state and its
+// version").
+//
+// Run before each test file by `setupFiles` in package.json.
+
+// For each name, a promise that settles once the last request for it has
+// let the lock go.
+const released = new Map();
+
+function request(name, callback) {
+    const previous = released.get(name) || Promise.resolve();
+    const result = previous.then(() => callback({ name, mode: "exclusive" }));
+    released.set(
+        name,
+        result.catch(() => {}),
+    );
+    return result;
+}
+
+globalThis.navigator = { locks: { request } };

tests/uniswapRecipient.test.js

@@ -11,7 +11,8 @@
 // what each PERMIT2_TRANSFER_FROM moves
 // (https://git.eeqj.de/sneak/AutistMask/issues/611), and when an
 // UNWRAP_WETH makes the output ETH
-// (https://git.eeqj.de/sneak/AutistMask/issues/607).
+// (https://git.eeqj.de/sneak/AutistMask/issues/607 and
+// https://git.eeqj.de/sneak/AutistMask/issues/642).
 //
 // Every swap command, SWEEP, WRAP_ETH, UNWRAP_WETH, TRANSFER, PAY_PORTION,
 // PAY_PORTION_FULL_PRECISION, PERMIT2_TRANSFER_FROM, ACROSS_V4_DEPOSIT_V3 and
@@ -745,6 +746,329 @@ describe("an UNWRAP_WETH makes the output ETH only when the router holds it", ()
     });
 });
 
+// https://git.eeqj.de/sneak/AutistMask/issues/642: a step between the swap and
+// the UNWRAP_WETH may take WETH out of the router or pay it WETH, and a step
+// after an UNWRAP_WETH into the router may pay its ETH out as WETH, yet each
+// route read as ETH with the swap's minimum. A step the decoder read that is a
+// PERMIT2_PERMIT, a BALANCE_CHECK_ERC20, or a SWEEP, TRANSFER, PAY_PORTION or
+// PAY_PORTION_FULL_PRECISION of a token other than WETH, and not of ETH to a
+// WETH contract, cannot take WETH out of the router or pay anyone WETH; the
+// decoder treats every other step as one that may.
+describe("what reaches the UNWRAP_WETH of the swap's WETH", () => {
+    const NO_MINIMUM_TO_USER = PAID_TO_USER.filter(
+        (l) => l !== "Min. received",
+    );
+    const NO_MINIMUM_ELSEWHERE = PAID_ELSEWHERE.filter(
+        (l) => l !== "Min. paid out",
+    );
+
+    test.each([
+        {
+            kind: "a TRANSFER of 0.0025 WETH",
+            step: transfer(0x05, WETH, OTHER, ONE_WETH / 400n),
+        },
+        {
+            kind: "a PAY_PORTION of 25 bips",
+            step: transfer(0x06, WETH, OTHER, 25n),
+        },
+        {
+            kind: "a PAY_PORTION_FULL_PRECISION of 1e15",
+            step: transfer(0x07, WETH, OTHER, 10n ** 15n),
+        },
+    ])(
+        "$kind to another address between them reads as ETH with no minimum",
+        ({ step }) => {
+            const result = decode(
+                execute(swapToWeth(ADDRESS_THIS), step, unwrapWeth(MSG_SENDER)),
+                USER,
+                ROUTER_V2_1_2,
+            );
+            expect(result.name).toBe("Swap USDT → ETH");
+            expect(labels(result)).toEqual(NO_MINIMUM_ELSEWHERE);
+            expect(paidTo(result)).toEqual([OTHER]);
+        },
+    );
+
+    test.each([
+        {
+            kind: "a SWEEP whose recipient cannot be read",
+            step: withDirtyWord(sweep(WETH, OTHER), 1),
+        },
+        {
+            kind: "a V4 SETTLE of 0.5 WETH from the router",
+            step: v4Swap([
+                0x0b,
+                coder.encode(
+                    ["address", "uint256", "bool"],
+                    [WETH, ONE_WETH / 2n, false],
+                ),
+            ]),
+        },
+        {
+            kind: "a bridge deposit of 0.5 WETH",
+            step: acrossDeposit(USER, USER, WETH, ONE_WETH / 2n),
+        },
+        {
+            kind: "a PERMIT2_TRANSFER_FROM of 0.5 WETH into the router",
+            step: permit2TransferFrom(WETH, ADDRESS_THIS, ONE_WETH / 2n),
+        },
+    ])("$kind between them reads as ETH with no minimum", ({ step }) => {
+        const result = decode(
+            execute(swapToWeth(ADDRESS_THIS), step, unwrapWeth(MSG_SENDER)),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received")).toBeUndefined();
+        expect(detail(result, "Min. paid out")).toBeUndefined();
+    });
+
+    test.each([
+        {
+            kind: "a PERMIT2_PERMIT between them",
+            steps: [permit2Permit(USDT, USDT_2000), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "a BALANCE_CHECK_ERC20 of another address between them",
+            steps: [balanceCheck(USDC, 1n, OTHER), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "a BALANCE_CHECK_ERC20 of the sender with a zero minimum between them",
+            steps: [balanceCheck(USDC, 0n), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "a SWEEP of USDC between them",
+            steps: [sweep(USDC, MSG_SENDER), unwrapWeth(MSG_SENDER)],
+        },
+        {
+            kind: "an UNWRAP_WETH into the router, then a SWEEP of its ETH,",
+            steps: [unwrapWeth(ADDRESS_THIS), sweep(ZERO, MSG_SENDER)],
+        },
+    ])("$kind reads as ETH with the swap's minimum", ({ steps }) => {
+        const result = decode(execute(swapToWeth(ADDRESS_THIS), ...steps));
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 ETH");
+    });
+
+    test("a V4 step that TAKEs its WETH to the router, then an UNWRAP_WETH to the user, reads as ETH with the swap's minimum", () => {
+        const result = decode(
+            execute(
+                v4Swap(
+                    SWAP_USDT_FOR_WETH,
+                    SETTLE_USDT,
+                    take(WETH, ADDRESS_THIS),
+                ),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 ETH");
+    });
+
+    test.each([
+        {
+            kind: "a TRANSFER of 100 USDC",
+            step: transfer(0x05, USDC, OTHER, 100000000n),
+        },
+        {
+            kind: "a PAY_PORTION of 25 bips of USDC",
+            step: transfer(0x06, USDC, OTHER, 25n),
+        },
+        {
+            kind: "a PAY_PORTION_FULL_PRECISION of 1e15 of USDC",
+            step: transfer(0x07, USDC, OTHER, 10n ** 15n),
+        },
+    ])(
+        "$kind to another address between them reads as ETH with the swap's minimum",
+        ({ step }) => {
+            const result = decode(
+                execute(swapToWeth(ADDRESS_THIS), step, unwrapWeth(MSG_SENDER)),
+                USER,
+                ROUTER_V2_1_2,
+            );
+            expect(result.name).toBe("Swap USDT → ETH");
+            expect(paidTo(result)).toEqual([OTHER]);
+            expect(detail(result, "Min. paid out").value).toBe("1.0000 ETH");
+        },
+    );
+
+    test.each([
+        {
+            kind: "a TRANSFER of 0.0025 ETH",
+            step: transfer(0x05, ZERO, OTHER, ONE_WETH / 400n),
+        },
+        {
+            kind: "a PAY_PORTION of 25 bips of its ETH",
+            step: transfer(0x06, ZERO, OTHER, 25n),
+        },
+        {
+            kind: "a PAY_PORTION_FULL_PRECISION of 1e15 of its ETH",
+            step: transfer(0x07, ZERO, OTHER, 10n ** 15n),
+        },
+    ])(
+        "an UNWRAP_WETH into the router, then $kind to another address, then a SWEEP of its ETH to the user, reads as ETH with the swap's minimum",
+        ({ step }) => {
+            const result = decode(
+                execute(
+                    swapToWeth(ADDRESS_THIS),
+                    unwrapWeth(ADDRESS_THIS),
+                    step,
+                    sweep(ZERO, MSG_SENDER),
+                ),
+                USER,
+                ROUTER_V2_1_2,
+            );
+            expect(result.name).toBe("Swap USDT → ETH");
+            expect(paidTo(result)).toEqual([OTHER]);
+            expect(detail(result, "Min. paid out").value).toBe("1.0000 ETH");
+        },
+    );
+
+    // The SWEEP pays the user the swap's WETH, so the UNWRAP_WETH unwraps the
+    // WRAP_ETH's.
+    test("a SWEEP of the swap's WETH to the user, then a WRAP_ETH into the router, reads as ETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                sweep(WETH, MSG_SENDER),
+                wrapEth(ADDRESS_THIS, ONE_WETH),
+                unwrapWeth(MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → ETH");
+        expect(labels(result)).toEqual(NO_MINIMUM_TO_USER);
+    });
+
+    test("an UNWRAP_WETH into the router, then a WRAP_ETH of all its ETH to the user, reads as WETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(ADDRESS_THIS),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(labels(result)).toEqual(NO_MINIMUM_TO_USER);
+    });
+
+    // The router reads the recipient from the last 20 bytes of its word,
+    // here address(2), the router itself.
+    test("an UNWRAP_WETH whose recipient cannot be read, then a WRAP_ETH of all the router's ETH to the user, reads as WETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                withDirtyWord(unwrapWeth(ADDRESS_THIS), 0),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(detail(result, "Min. received")).toBeUndefined();
+        expect(detail(result, "Min. paid out")).toBeUndefined();
+    });
+
+    // The first UNWRAP_WETH may pay the router the swap's output as ETH, and
+    // the WRAP_ETH to the user pays all of it out as WETH, so the last
+    // UNWRAP_WETH finds none of it.
+    test.each([
+        {
+            kind: "an UNWRAP_WETH whose recipient cannot be read, then a WRAP_ETH of all the router's ETH to the user",
+            steps: [
+                withDirtyWord(unwrapWeth(ADDRESS_THIS), 0),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ],
+        },
+        {
+            kind: "an UNWRAP_WETH into the router, a WRAP_ETH of all its ETH to the user, then a WRAP_ETH of all its ETH into the router",
+            steps: [
+                unwrapWeth(ADDRESS_THIS),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+                wrapEth(ADDRESS_THIS, CONTRACT_BALANCE),
+            ],
+        },
+    ])(
+        "$kind, then an UNWRAP_WETH to the user, reads as WETH with no minimum",
+        ({ steps }) => {
+            const result = decode(
+                execute(
+                    swapToWeth(ADDRESS_THIS),
+                    ...steps,
+                    unwrapWeth(MSG_SENDER),
+                ),
+            );
+            expect(result.name).toBe("Swap USDT → WETH");
+            expect(detail(result, "Min. received")).toBeUndefined();
+            expect(detail(result, "Min. paid out")).toBeUndefined();
+        },
+    );
+
+    // A SWEEP of WETH pays out WETH, and ETH paid to a WETH contract pays the
+    // router WETH for it. The decoder treats each as a step that may pay out
+    // as WETH the swap's output, which the router holds as ETH.
+    test.each([
+        {
+            kind: "a SWEEP of WETH to the user",
+            step: sweep(WETH, MSG_SENDER),
+        },
+        {
+            kind: "a SWEEP of its ETH to the WETH contract",
+            step: sweep(ZERO, WETH),
+        },
+        {
+            kind: "a TRANSFER of 0.5 ETH to the WETH contract",
+            step: transfer(0x05, ZERO, WETH, ONE_WETH / 2n),
+        },
+        {
+            kind: "a PAY_PORTION of all its ETH to the WETH contract",
+            step: transfer(0x06, ZERO, WETH, 10000n),
+        },
+    ])(
+        "an UNWRAP_WETH into the router, then $kind, reads as WETH with no minimum",
+        ({ step }) => {
+            const result = decode(
+                execute(
+                    swapToWeth(ADDRESS_THIS),
+                    unwrapWeth(ADDRESS_THIS),
+                    step,
+                ),
+            );
+            expect(result.name).toBe("Swap USDT → WETH");
+            expect(detail(result, "Min. received")).toBeUndefined();
+            expect(detail(result, "Min. paid out")).toBeUndefined();
+        },
+    );
+
+    // The user receives 0.5 WETH and the rest of the swap's output as ETH.
+    test("an UNWRAP_WETH into the router, then a WRAP_ETH of 0.5 ETH to the user, reads as WETH with no minimum", () => {
+        const result = decode(
+            execute(
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(ADDRESS_THIS),
+                wrapEth(MSG_SENDER, ONE_WETH / 2n),
+                sweep(ZERO, MSG_SENDER),
+            ),
+        );
+        expect(result.name).toBe("Swap USDT → WETH");
+        expect(labels(result)).toEqual(NO_MINIMUM_TO_USER);
+    });
+
+    // The UNWRAP_WETH pays the user the swap's WETH as ETH; the WRAP_ETH wraps
+    // the ETH an earlier V4 step paid the router.
+    test("an UNWRAP_WETH to the user, then a WRAP_ETH of all the router's ETH to the user, reads as ETH", () => {
+        const result = decode(
+            execute(
+                v4Swap(
+                    SWAP_USDT_FOR_ETH,
+                    SETTLE_USDT,
+                    take(ZERO, ADDRESS_THIS),
+                ),
+                swapToWeth(ADDRESS_THIS),
+                unwrapWeth(MSG_SENDER),
+                wrapEth(MSG_SENDER, CONTRACT_BALANCE),
+            ),
+        );
+        expect(detail(result, "Token Out").value).toBe("ETH");
+        expect(detail(result, "Min. received").value).toBe("1.0000 ETH");
+    });
+});
+
 // https://git.eeqj.de/sneak/AutistMask/issues/606: any token a step pays the
 // router stays there unless a later step pays out or spends all of it, not
 // only the swap's output. A V4 SETTLE can take more of the user's tokens than
@@ -1711,15 +2035,6 @@ describe("a payout of part of the router's output", () => {
             ),
             min: "1.0000 WETH",
         },
-        {
-            kind: "PAY_PORTION of 25 bips, then UNWRAP_WETH",
-            data: execute(
-                swapToWeth(ADDRESS_THIS),
-                transfer(0x06, WETH, OTHER, 25n),
-                unwrapWeth(MSG_SENDER),
-            ),
-            min: "1.0000 ETH",
-        },
         {
             kind: "V4 TAKE_PORTION of 25 bips, then TAKE_ALL",
             data: execute(

tests/unknownScaleSend.test.js

@@ -120,7 +120,7 @@ global.document = {
     body: { prepend() {}, appendChild() {} },
     addEventListener() {},
 };
-global.navigator = { clipboard: { writeText() {} } };
+global.navigator.clipboard = { writeText() {} };
 
 const { AbiCoder, parseUnits } = require("ethers");
 const { fetchTokenBalances } = require("../src/shared/balances");