fix: the address screen shows a token just added at its fetched balance, not 0.0000 (closes #516)

A balance refresh that returns now draws the balances on AddressDetail or
AddressToken again when that screen is up, not only the wallet list; their
transaction lists are left alone. A token added on AddToken reads `quantity
unknown` instead of 0.0000 until a refresh that started with it tracked has
fetched every address's token balances. To tell an address whose token
balances the explorer did not return, the refresh takes them off its copy of
the wallets before fetching.

Model: opus-5-5

README.md

@@ -1396,9 +1396,8 @@ lists, the send-screen token selector, the address total and the remove-address
 warning (`isBelowOneMillionth()` in `src/shared/amountDisplay.js`). The Send and
 confirmation screens show it when its token is the one being sent. Tracked
 tokens with a zero balance are listed as well while "Show tracked tokens with
-zero balance" is on; a token just added on AddToken or SettingsAddToken whose
-balance no refresh has fetched yet is listed there as `quantity unknown` (see
-AddToken).
+zero balance" is on; a token just added on AddToken whose balance no refresh has
+fetched yet is listed there as `quantity unknown` (see AddToken).
 
 #### Stored state and its version
 
@@ -2370,9 +2369,7 @@ view would leave a wallet one click from deletion.
       add path
 - **Transitions**:
     - Any of the add paths shown, on success → adds the token and shows an
-      "Added SYMBOL" flash message (no screen change). Until its balance is
-      fetched, its balance line reads `quantity unknown`, as after "Add" on
-      AddToken
+      "Added SYMBOL" flash message (no screen change)
     - A duplicate, a scam-listed address, or a failed contract lookup → flash
       message, no screen change
     - "Add" by contract address, then a network switch in Settings before the
@@ -3280,25 +3277,15 @@ Currently supported:
   of a token other than `Token In`; one of `Token In` after an amount that is
   not a quantity (a V4 open delta, `ALREADY_PAID`, which keep their wording on
   the `Amount` line, or no stated amount, as of a V4 exact-out step); and one
-  whose amount the decoder does not know. When there is no `Amount` line, each
-  take the total counts gets them too, so that every amount the decoder reads is
-  shown: the amount the step that sets the input side states, when it is a
-  quantity and the user pays that step (a V2 or V3 step whose `payerIsUser` is
-  true, a V4 step the user pays some of its input token, or a `WRAP_ETH`, whose
-  ETH comes from the transaction's value), and each later take of `Token In`
-  added to it. A step that sets the input side and is paid from the router takes
-  nothing from the user's wallet and gets none. A `PERMIT2_PERMIT` the decoder
-  cannot read, then V3 exact-ins of 600 USDT and 400 DAI paid by the user, give
-  lines for both amounts. When the step that sets the input side states no
-  amount, the user pays it some of its input token, and there is no `Amount`
-  line, that step gets them too whenever another take's lines give a figure, or
-  a `PERMIT2_TRANSFER_FROM` of its token gives one, on the lines below or, into
-  the router, on its `Paid to` line, so that figure cannot read as all that
-  leaves. When it states no amount and the user pays it none of its input token,
-  as when the router pays it, that step takes none of that token from the user's
-  wallet and never gets them, with a permit or without. They come in step order,
-  except that the step that sets the input side comes first when it has them,
-  followed, when there is no `Amount` line, by the other takes the total counts:
+  whose amount the decoder does not know. When the step that sets the input side
+  states no amount, the user pays it some of its input token, and there is no
+  `Amount` line, that step gets them too whenever another take's lines give a
+  figure, or a `PERMIT2_TRANSFER_FROM` of its token gives one, on the lines
+  below or, into the router, on its `Paid to` line, so that figure cannot read
+  as all that leaves. When it states no amount and the user pays it none of its
+  input token, as when the router pays it, that step takes none of that token
+  from the user's wallet and never gets them, with a permit or without. They
+  come in step order, the step that sets the input side first when it has them:
   `Moved from the sender`, its amount, worded as the `Amount` line words one, or
   `Unknown (could not be decoded)` when the decoder does not know it;
   `Token moved`, giving the token's address as the `Token In` line does; and

src/popup/views/addToken.js

@@ -4,7 +4,7 @@ const {
     showFlash,
     escapeHtml,
     goBack,
-    trackToken,
+    tokensNotFetched,
 } = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
 const { state, saveState, currentNetwork } = require("../../shared/state");
@@ -79,12 +79,13 @@ function init(ctx) {
                 return;
             }
             log.infof("Adding token", info.symbol, contractAddr);
-            trackToken({
+            state.trackedTokens.push({
                 address: contractAddr,
                 symbol: info.symbol,
                 decimals: info.decimals,
                 name: info.name,
             });
+            tokensNotFetched.add(contractAddr.toLowerCase());
             await saveState();
             ctx.doRefreshAndRender();
             // Pop the stack (back to address detail) and re-render it

src/popup/views/helpers.js

@@ -380,22 +380,15 @@ function balanceLine(symbol, amount, price, tokenId) {
     );
 }
 
-// Contract addresses, lowercased, of the tokens the user added that no balance
-// refresh has fetched yet. An address with no balance row for one of them has
-// no known balance of it, so its line says the quantity is unknown rather than
-// 0.0000. trackToken() adds a token here, and doRefreshAndRender() in
+// Contract addresses, lowercased, of the tokens added on AddToken that no
+// balance refresh has fetched yet. An address with no balance row for one of
+// them has no known balance of it, so its line says the quantity is unknown
+// rather than 0.0000. AddToken adds a token here, and doRefreshAndRender() in
 // src/popup/index.js takes it off once a refresh that started with it tracked
 // has fetched every address's token balances
 // (https://git.eeqj.de/sneak/AutistMask/issues/516).
 const tokensNotFetched = new Set();
 
-// Tracks `token` on the active network, as every add path on AddToken and
-// SettingsAddToken does. No refresh has fetched its balance yet.
-function trackToken(token) {
-    state.trackedTokens.push(token);
-    tokensNotFetched.add(token.address.toLowerCase());
-}
-
 function balanceLinesForAddress(addr, trackedTokens, showZero) {
     let html = balanceLine(
         nativeCurrency(),
@@ -804,7 +797,6 @@ module.exports = {
     balanceLine,
     balanceLinesForAddress,
     tokensNotFetched,
-    trackToken,
     addressHoldsFunds,
     keyMaterialName,
     unknownableAmount,

src/popup/views/settingsAddToken.js

@@ -1,11 +1,4 @@
-const {
-    $,
-    showView,
-    showFlash,
-    escapeHtml,
-    goBack,
-    trackToken,
-} = require("./helpers");
+const { $, showView, showFlash, escapeHtml, goBack } = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const { lookupTokenInfo } = require("../../shared/balances");
@@ -50,7 +43,7 @@ function renderTop10() {
                     decimals: parseInt(btn.dataset.decimals, 10),
                     name: btn.dataset.name || btn.dataset.symbol,
                 };
-                trackToken(token);
+                state.trackedTokens.push(token);
                 await saveState();
                 showFlash("Added " + token.symbol);
                 renderTop10();
@@ -117,7 +110,7 @@ function init(_ctx) {
             decimals: parseInt(opt.dataset.decimals, 10),
             name: opt.dataset.name || opt.dataset.symbol,
         };
-        trackToken(token);
+        state.trackedTokens.push(token);
         await saveState();
         showFlash("Added " + token.symbol);
         renderTop10();
@@ -163,7 +156,7 @@ function init(_ctx) {
                 return;
             }
             log.infof("Adding token", info.symbol, addr);
-            trackToken({
+            state.trackedTokens.push({
                 address: addr,
                 symbol: info.symbol,
                 decimals: info.decimals,

src/shared/uniswap.js

@@ -1234,11 +1234,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         let inputToken = null;
         let inputAmount = null;
         let inputEstablished = false;
-        // Whether the user pays the step that set the input side: a V2 or V3
-        // swap step with `payerIsUser` true, a V4 step the user pays some of
-        // its input currency (see decodeV4Swap()), or a WRAP_ETH, whose ETH
-        // comes from the transaction's value. A step paid from the router
-        // takes nothing from the sender.
+        // Whether the user pays the V4 step that set the input side any of
+        // its input currency (see decodeV4Swap()). Only a V4 step can set the
+        // input side with no amount, the one case in which this is read.
         let inputPaidByUser = false;
         // The last PERMIT2_PERMIT this decoder read before a step set the
         // input side, or null (see permitStands after the loop).
@@ -1624,7 +1622,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (s) {
                         if (!inputEstablished) {
                             setInputOnce(s.tokenIn, s.amountIn);
-                            inputPaidByUser = s.payerIsUser;
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountIn);
                         }
@@ -1648,7 +1645,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (s) {
                         if (!inputEstablished) {
                             setInputOnce(s.tokenIn, s.amountIn);
-                            inputPaidByUser = s.payerIsUser;
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountIn);
                         }
@@ -1680,7 +1676,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (s) {
                         if (!inputEstablished) {
                             setInputOnce(s.tokenIn, s.amountInMax);
-                            inputPaidByUser = s.payerIsUser;
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountInMax);
                         }
@@ -1776,13 +1771,10 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 } else if (command === "WRAP_ETH") {
                     const w = decodeWrapEth(inputs[i]);
                     if (w) {
-                        if (!inputEstablished) {
-                            setInputOnce(
-                                "0x0000000000000000000000000000000000000000",
-                                w.amount,
-                            );
-                            inputPaidByUser = true;
-                        }
+                        setInputOnce(
+                            "0x0000000000000000000000000000000000000000",
+                            w.amount,
+                        );
                         addPayee(w.recipient);
                         // CONTRACT_BALANCE wraps all the router's ETH.
                         if (w.amount === CONTRACT_BALANCE) {
@@ -2049,11 +2041,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // (see spentUnread()), or a token it does not know.
         const spentFromSender = [];
         let total = null;
-        // The takes from the sender that `total` adds up, each a quantity, as
-        // { token, amount }. When there is no Amount line, each gets lines of
-        // its own (see below). The amount of a step that set the input side
-        // and is paid from the router counts in `total` but is not among them.
-        const inTotal = [];
         // Whether the step that set the input side counts as a take from the
         // sender, which may get lines of its own. The amount it stated counts
         // whoever pays it. Stating none, it counts only when the user pays it
@@ -2066,9 +2053,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         let firstTakeUnstated = null;
         if (!permitStands || sameAddress(inputToken, permit.token)) {
             total = inputAmount;
-            if (typeof inputAmount === "bigint" && inputPaidByUser) {
-                inTotal.push({ token: inputToken, amount: inputAmount });
-            }
             if (hasFirstTake && !present(inputAmount)) {
                 firstTakeUnstated = { token: inputToken, amount: null };
             }
@@ -2087,7 +2071,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 typeof t.amount === "bigint"
             ) {
                 total += t.amount;
-                inTotal.push(t);
                 continue;
             }
             spentFromSender.push(t);
@@ -2219,9 +2202,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // A null token in `spentFromSender`, a step this decoder did not read
         // or a token it does not know, and one in `permits`, a permit or
         // batch it could not read, leave no Amount figure, which may then be
-        // too low. With no Amount line, each take the total adds up gets
-        // lines of its own, first, so that every amount this decoder read is
-        // shown.
+        // too low.
         if (
             present(inputAmount) &&
             spentFromSender.every((s) => present(s.token)) &&
@@ -2233,8 +2214,6 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 value: amount.display,
                 rawValue: amount.raw,
             });
-        } else {
-            spentFromSender.unshift(...inTotal);
         }
 
         // What steps take from the sender beyond the Amount line, in the shape

tests/addedTokenBalance.test.js

@@ -1,7 +1,6 @@
 // After "Add" on AddToken, AddressDetail lists the new token, and its line reads
 // `quantity unknown`, not 0.0000, until a balance refresh that asked the
-// explorer about the token has returned for every address; so does a token
-// added on SettingsAddToken, wherever it is listed. A refresh that
+// explorer about the token has returned for every address. A refresh that
 // returns draws the balances on AddressDetail or AddressToken again, so the
 // fetched balance shows without the screen being reopened
 // (https://git.eeqj.de/sneak/AutistMask/issues/516). Driven through the real
@@ -79,28 +78,16 @@ async function addNewToken(page) {
     await page.click("btn-add-token-confirm");
 }
 
-// NEW_TOKEN's row in the balance list in element `id`, AddressDetail's unless
-// another is named, as markup.
-function newTokenRow(page, id = "address-balances") {
+// NEW_TOKEN's row in AddressDetail's balance list, as markup.
+function newTokenRow(page) {
     return page
-        .node(id)
+        .node("address-balances")
         .innerHTML.split("<div ")
         .find((row) =>
             row.includes('data-token="' + NEW_TOKEN.toLowerCase() + '"'),
         );
 }
 
-// AddressDetail for the one address opened from Home, as its `[info]` button
-// does.
-async function openAddress(page) {
-    const { state } = require("../src/shared/state");
-    state.selectedWallet = 0;
-    state.selectedAddress = 0;
-    require("../src/popup/views/helpers").pushCurrentView();
-    require("../src/popup/views/addressDetail").show();
-    await page.settle();
-}
-
 // AddressToken for `token` opened from AddressDetail, as tapping the token's
 // row there does.
 async function openToken(page, token) {
@@ -194,38 +181,6 @@ test("AddressToken for the new token reads quantity unknown until the refresh re
     );
 });
 
-test("a token added by contract address on SettingsAddToken reads quantity unknown until the refresh returns", async () => {
-    const page = await bootPopup(unversionedValidProfile());
-    expect(page.visibleViews()).toEqual(["main"]);
-    const finish = holdNextRefresh(page);
-    const { lookupTokenInfo } = require("../src/shared/balances");
-    lookupTokenInfo.mockResolvedValueOnce({
-        symbol: "NEW",
-        decimals: 18,
-        name: "New Token",
-    });
-
-    await page.click("btn-settings");
-    await page.click("btn-settings-add-token");
-    page.node("settings-addtoken-address").value = NEW_TOKEN;
-    await page.click("btn-settings-addtoken-manual");
-    await page.click("btn-settings-addtoken-back");
-    await page.click("btn-settings-back");
-    expect(page.visibleViews()).toEqual(["main"]);
-    const onHome = newTokenRow(page, "wallet-list");
-    expect(onHome).toContain("quantity unknown");
-    expect(onHome).not.toContain("0.0000");
-
-    await openAddress(page);
-    const onAddress = newTokenRow(page);
-    expect(onAddress).toContain("quantity unknown");
-    expect(onAddress).not.toContain("0.0000");
-
-    await finish([MILLION]);
-
-    expect(newTokenRow(page)).toContain("1000000.0000");
-});
-
 test("a refresh that returns while AddressToken is up draws its balance again", async () => {
     const page = await bootPopup(
         unversionedValidProfile({

tests/flashLine.test.js

@@ -88,7 +88,7 @@ describe.each([
             showFlash: (msg) => flashes.push(msg),
             escapeHtml: (s) => s,
             goBack: () => {},
-            trackToken: () => {},
+            tokensNotFetched: new Set(),
         }));
 
         require("../src/popup/views/" + view).init({

tests/uniswap.test.js

@@ -1447,20 +1447,6 @@ describe("uniswap decoder", () => {
             USDT_ADDR,
             USDC_ADDR,
         ]);
-        // The lines of its 600 USDT when there is no Amount line.
-        // https://git.eeqj.de/sneak/AutistMask/issues/659 — on next at
-        // 5f2b606 no line gave the 600 USDT then.
-        const USDT_600_GROUP = [
-            ["Moved from the sender", "600.0000 USDT"],
-            ["Token moved", "USDT (" + USDT_ADDR + ")"],
-            ["Moved to", "The swap step that spends it"],
-        ];
-        // The same for a step's 400 USDT.
-        const USDT_400_GROUP = [
-            ["Moved from the sender", "400.0000 USDT"],
-            ["Token moved", "USDT (" + USDT_ADDR + ")"],
-            ["Moved to", "The swap step that spends it"],
-        ];
         // V4 SETTLE of `amount` of `currency`, and TAKE of `amount` of
         // `currency` to `recipient`.
         const settle = (currency, amount, payerIsUser) =>
@@ -1687,7 +1673,6 @@ describe("uniswap decoder", () => {
                     encodeV4SettleAll(USDT_ADDR, USDT_400),
                 ],
                 lines: [
-                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Token moved", "USDT (" + USDT_ADDR + ")"],
                     ["Moved to", "The swap step that spends it"],
@@ -1708,7 +1693,6 @@ describe("uniswap decoder", () => {
                     encodeV4TakeAll(USDC_ADDR, 0n),
                 ],
                 lines: [
-                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Token moved", "USDT (" + USDT_ADDR + ")"],
                     ["Moved to", "The swap step that spends it"],
@@ -1840,8 +1824,6 @@ describe("uniswap decoder", () => {
 
         // A step that may take from the sender what the decoder did not read
         // leaves no Amount figure, which may be too low, and one line says so.
-        // The amount of the step that set the input side then gets lines of
-        // its own.
         const UNREAD_SWAP = V4_SWAP_ACTION_SHAPES[0].newer;
         test.each([
             {
@@ -1889,7 +1871,6 @@ describe("uniswap decoder", () => {
                 [V3_600, encodeV4Swap(new Uint8Array(actions), params)],
             );
             expect(linesBetweenTokens(result)).toEqual([
-                ...USDT_600_GROUP,
                 ["Moved from the sender", UNDECODED],
             ]);
         });
@@ -1912,9 +1893,6 @@ describe("uniswap decoder", () => {
                         ],
                     ),
                 ],
-                // Nothing read says the user pays this step, so its 400 USDT
-                // gets no lines of its own.
-                first: [],
             },
             {
                 kind: "a V3 step of 600 USDT, then a V4 step whose input cannot be read",
@@ -1985,27 +1963,9 @@ describe("uniswap decoder", () => {
                     ),
                 ],
             },
-            // Each take the total would add up gets lines of its own.
-            {
-                kind: "a V3 step of 600 USDT and a V2 step of 400 USDT the user pays for, then a PERMIT2_TRANSFER_FROM_BATCH",
-                commands: [0x00, 0x08, 0x0d],
-                inputs: [
-                    V3_600,
-                    encodeV2SwapExactIn(USER_ADDR, USDT_400, 390000000n, [
-                        USDT_ADDR,
-                        USDC_ADDR,
-                    ]),
-                    coder.encode(
-                        ["tuple(address,address,uint160,address)[]"],
-                        [[[USER_ADDR, OTHER_ADDR, USDT_400, USDT_ADDR]]],
-                    ),
-                ],
-                first: [...USDT_600_GROUP, ...USDT_400_GROUP],
-            },
-        ])("$kind", ({ commands, inputs, first = USDT_600_GROUP }) => {
+        ])("$kind", ({ commands, inputs }) => {
             const result = decodeSteps(commands, inputs);
             expect(linesBetweenTokens(result)).toEqual([
-                ...first,
                 ["Moved from the sender", UNDECODED],
             ]);
         });
@@ -2024,7 +1984,6 @@ describe("uniswap decoder", () => {
                 commands: [0x00, 0x08, 0x21],
                 inputs: [V3_600, V2_DAI_400, SUB_PLAN],
                 lines: [
-                    ...USDT_600_GROUP,
                     ["Moved from the sender", "400.0000 DAI"],
                     ["Token moved", "DAI (" + DAI_ADDR + ")"],
                     ["Moved to", "The swap step that spends it"],
@@ -2036,7 +1995,6 @@ describe("uniswap decoder", () => {
                 commands: [0x21, 0x00, 0x08],
                 inputs: [SUB_PLAN, V3_600, V2_DAI_400],
                 lines: [
-                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Moved from the sender", "400.0000 DAI"],
                     ["Token moved", "DAI (" + DAI_ADDR + ")"],
@@ -2055,7 +2013,6 @@ describe("uniswap decoder", () => {
                     SUB_PLAN,
                 ],
                 lines: [
-                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Moved from the sender", "400.0000 DAI"],
                     ["Token moved", "DAI (" + DAI_ADDR + ")"],
@@ -2333,103 +2290,6 @@ describe("uniswap decoder", () => {
             expect(linesBetweenTokens(result)).toEqual(lines);
         });
 
-        // A step that sets the input side and is paid from the router takes
-        // nothing from the sender, so with no Amount line its amount gets no
-        // lines of its own: in each route below the sender's 600 USDT moves
-        // into the router first, and such lines would say it left twice.
-        const INTO_ROUTER_600 = permit2TransferFrom(
-            USDT_ADDR,
-            ROUTER_ADDR,
-            USDT_600,
-        );
-        const V3_600_FROM_ROUTER = coder.encode(
-            ["address", "uint256", "uint256", "bytes", "bool"],
-            [
-                USER_ADDR,
-                USDT_600,
-                590000000n,
-                encodeV3Path([USDT_ADDR, USDC_ADDR]),
-                false,
-            ],
-        );
-        const TRANSFER_FROM_BATCH = coder.encode(
-            ["tuple(address,address,uint160,address)[]"],
-            [[[USER_ADDR, OTHER_ADDR, USDT_400, USDT_ADDR]]],
-        );
-        test.each([
-            {
-                kind: "a PERMIT2_TRANSFER_FROM of 600 USDT into the router, a V3 exact-in of 600 USDT paid from the router, then a PERMIT2_TRANSFER_FROM_BATCH",
-                commands: [0x02, 0x00, 0x0d],
-                inputs: [
-                    INTO_ROUTER_600,
-                    V3_600_FROM_ROUTER,
-                    TRANSFER_FROM_BATCH,
-                ],
-                lines: [["Moved from the sender", UNDECODED]],
-            },
-            {
-                kind: "a PERMIT2_PERMIT that cannot be read, a PERMIT2_TRANSFER_FROM of 600 USDT into the router, then a V3 exact-in of 600 USDT paid from the router",
-                commands: [0x0a, 0x02, 0x00],
-                inputs: [
-                    dirtyWord(
-                        encodePermit2(USDT_ADDR, 5000000000n, ROUTER_ADDR),
-                        0,
-                    ),
-                    INTO_ROUTER_600,
-                    V3_600_FROM_ROUTER,
-                ],
-                lines: [["Permit2 allowance", UNDECODED]],
-            },
-            {
-                kind: "a PERMIT2_TRANSFER_FROM of 600 USDT into the router, a V4 step swapping 600 USDT whose SETTLE the router pays, then a PERMIT2_TRANSFER_FROM_BATCH",
-                commands: [0x02, 0x10, 0x0d],
-                inputs: [
-                    INTO_ROUTER_600,
-                    encodeV4Swap(
-                        new Uint8Array([
-                            V4_SWAP_EXACT_IN_SINGLE_ID,
-                            V4_SETTLE_ID,
-                            V4_TAKE_ALL_ID,
-                        ]),
-                        [
-                            encodeV4ExactInSingle(
-                                USDT_ADDR,
-                                USDC_ADDR,
-                                USDT_600,
-                                590000000n,
-                            ),
-                            settle(USDT_ADDR, USDT_600, false),
-                            encodeV4TakeAll(USDC_ADDR, 0n),
-                        ],
-                    ),
-                    TRANSFER_FROM_BATCH,
-                ],
-                lines: [["Moved from the sender", UNDECODED]],
-            },
-            {
-                kind: "a PERMIT2_TRANSFER_FROM of 600 USDT into the router, a V2 exact-in of CONTRACT_BALANCE paid from the router, then an EXECUTE_SUB_PLAN",
-                commands: [0x02, 0x08, 0x21],
-                inputs: [
-                    INTO_ROUTER_600,
-                    coder.encode(
-                        ["address", "uint256", "uint256", "address[]", "bool"],
-                        [
-                            USER_ADDR,
-                            2n ** 255n, // CONTRACT_BALANCE
-                            590000000n,
-                            [USDT_ADDR, USDC_ADDR],
-                            false,
-                        ],
-                    ),
-                    SUB_PLAN,
-                ],
-                lines: [["Moved from the sender", UNDECODED]],
-            },
-        ])("$kind", ({ commands, inputs, lines }) => {
-            const result = decodeSteps(commands, inputs);
-            expect(linesBetweenTokens(result)).toEqual(lines);
-        });
-
         // A V3_SWAP_EXACT_OUT the user pays for, of at most `amountInMax`
         // USDT for USDC.
         const v3ExactOut = (amountInMax) =>
@@ -2775,35 +2635,10 @@ describe("uniswap decoder", () => {
                         [input, V3_600],
                     );
                     expect(linesBetweenTokens(result)).toEqual([
-                        ...USDT_600_GROUP,
                         ["Permit2 allowance", UNDECODED],
                     ]);
                 },
             );
-
-            // https://git.eeqj.de/sneak/AutistMask/issues/659 — on next at
-            // 5f2b606 only the 400 DAI was shown.
-            test("a PERMIT2_PERMIT that cannot be read, then a V3 exact-in of 600 USDT and a V2 exact-in of 400 DAI, both paid by the user, shows both amounts", () => {
-                const result = decodeSteps(
-                    [0x0a, 0x00, 0x08],
-                    [
-                        dirtyWord(
-                            encodePermit2(USDT_ADDR, USDT_5000, ROUTER_ADDR),
-                            0,
-                        ),
-                        V3_600,
-                        encodeV2SwapExactIn(USER_ADDR, DAI_400, 390000000n, [
-                            DAI_ADDR,
-                            USDC_ADDR,
-                        ]),
-                    ],
-                );
-                expect(linesBetweenTokens(result)).toEqual([
-                    ...USDT_600_GROUP,
-                    ...DAI_GROUP,
-                    ["Permit2 allowance", UNDECODED],
-                ]);
-            });
         });
 
         // A V3_SWAP_EXACT_OUT whose path is shorter than one token cannot be
@@ -2815,12 +2650,7 @@ describe("uniswap decoder", () => {
                 [USER_ADDR, 390000000n, USDT_400, "0x", true],
             );
             const result = decodeSteps([0x00, 0x01], [V3_600, unreadable]);
-            // With a V3 exact-out step, the 600 USDT reads as a maximum, as
-            // the Amount line would.
             expect(linesBetweenTokens(result)).toEqual([
-                ["Moved from the sender", "Up to 600.0000 USDT"],
-                ["Token moved", "USDT (" + USDT_ADDR + ")"],
-                ["Moved to", "The swap step that spends it"],
                 ["Moved from the sender", UNDECODED],
             ]);
             expect(detail(result, "Paid to").value).toBe(UNDECODED);
@@ -2871,9 +2701,6 @@ describe("uniswap decoder", () => {
                 ],
             );
             expect(linesBetweenTokens(result)).toEqual([
-                ["Moved from the sender", "Up to 0.5000 WETH"],
-                ["Token moved", "WETH (" + WETH_ADDR + ")"],
-                ["Moved to", "The swap step that spends it"],
                 ["Moved from the sender", UNDECODED],
                 ...permitLines("1.0000 WETH", WETH_ADDR, "WETH", ROUTER_ADDR),
             ]);
@@ -3029,15 +2856,14 @@ describe("uniswap decoder", () => {
         );
 
         // The V4 exact-out route above the other way round, where the later
-        // take's unknown amount leaves no Amount figure and the 400 USDT gets
-        // lines of its own, and other ways the step that sets the input side
-        // states no amount.
+        // take's unknown amount leaves no figure at all, and other ways the
+        // step that sets the input side states no amount.
         test.each([
             {
                 kind: "a V2 exact-out of at most 400 USDT, then a V4 exact-out step of at most 600 USDT",
                 commands: [0x09, 0x10],
                 inputs: [V2_EXACT_OUT_400, V4_EXACT_OUT_600],
-                lines: [...UP_TO_400_USDT, ...UNKNOWN_USDT],
+                lines: UNKNOWN_USDT,
             },
             {
                 kind: "a PERMIT2_PERMIT of 1 USDT to another spender, a V4 exact-out step of at most 600 USDT, then a V2 exact-out of at most 400 USDT",

tests/uniswapRecipient.test.js

@@ -1439,17 +1439,8 @@ describe("any token left in the router is not received", () => {
             "Token In",
             // A later step whose SETTLE or SETTLE_ALL the decoder cannot read
             // may take anything from the sender: one line says so, in place
-            // of the Amount line (https://git.eeqj.de/sneak/AutistMask/issues/625),
-            // after the lines the WRAP_ETH's 1 ETH then gets
-            // (https://git.eeqj.de/sneak/AutistMask/issues/659).
-            ...(unread
-                ? [
-                      "Moved from the sender",
-                      "Token moved",
-                      "Moved to",
-                      "Moved from the sender",
-                  ]
-                : ["Amount"]),
+            // of the Amount line (https://git.eeqj.de/sneak/AutistMask/issues/625).
+            unread ? "Moved from the sender" : "Amount",
             // A later swap step the user pays for spends `spent` of a token
             // other than Token In.
             ...(spent
@@ -1466,11 +1457,9 @@ describe("any token left in the router is not received", () => {
             expect(detail(result, "Moved from the sender").value).toBe(spent);
         }
         if (unread) {
-            expect(
-                result.details
-                    .filter((d) => d.label === "Moved from the sender")
-                    .map((d) => d.value),
-            ).toEqual(["1.0000 ETH", UNDECODED]);
+            expect(detail(result, "Moved from the sender").value).toBe(
+                UNDECODED,
+            );
         }
         expect(paidTo(result)).toEqual([STAYS_IN_ROUTER]);
         expect(detail(result, "Token moved into the router")).toEqual(left);