parseInt(decimals || "18") ran before writing stored tokenBalances[].decimals, so an explorer reporting no decimals produced a fabricated 18 indistinguishable from a real one at read time. That defeated the resolve-or-refuse guarantees of #306 and #340: their refusal paths were intact but never fired, because the guess was laundered upstream of them.
An absent scale is now stored as unknown, and a holding whose scale nothing knows carries a null balance -- unknown, never zero -- with six reader sites saying so rather than printing 0.0000. The Send screen resolves the display scale rather than reading the stored one, so a bundled token whose explorer row omits decimals still sends; when the scale cannot be resolved the stored quantity is withdrawn too, so the user is told the balance is unknown rather than only that the fee failed.
Existing fabricated 18s cannot be told apart retroactively and are replaced wholesale on the next balance refresh. An explorer-sourced scale stays trusted -- only fabrication is removed; the reasoning is recorded on the issue.
Five defects, one of which destroyed every wallet, came from src/background reading and writing the module-level state singleton the MV3 worker never populates, which silently served DEFAULT_STATE. Each point fix created the next defect. The background now has its own per-call getState() and a queued read-modify-write updateState(); the singleton is unreachable from it, and an unpopulated read throws instead of serving defaults.
The prohibition is enforced by the build, not by review: build.js asserts over esbuild's own metafile that no forbidden module is an input of a background bundle, so every specifier syntax esbuild resolves is covered, and both halves of the table are checked for rot -- a stale key, a stale module, an empty list, or an unlisted entry point under src/background/ all fail the build. The ESLint rule remains as fast local feedback and reads the same shared table. Known bounds are documented where the table lives.
Also closes#320: getProvider() now requires a validated network id, so a cold worker no longer prepares a non-mainnet dApp transaction for mainnet and gets refused by the wallet's own verifier. backgroundRefresh() no longer mutates address objects across a network round trip, the broadcast path takes its endpoint and chain id from one snapshot, and eight test storage stubs now structured-clone on get as the real chrome.storage.local does.
closes#320
A token calling itself " ETH " missed the known-symbol table entirely, so the
spoof check reported it was not a spoof -- while HTML collapsed the whitespace
and displayed it as ETH next to the user's real ETH. One space defeated the
filter.
The symbol is now folded before the lookup: NFKC, remove what paints nothing,
trim, uppercase. The rule is "remove what paints nothing"; the Unicode classes
are how that is spelled, which is why U+007F is named separately -- it is a
control, reached by no class, and measures identical to no character at all.
Every width in the module comment was measured in the pinned browser rather
than reasoned about, and the boundary is pinned from both sides: widening to
all control characters fails the visible-controls test, narrowing back fails
the invisible-characters test. Two default-ignorable code points do paint a
box and are folded anyway, which can only hide a token that does not resemble
the symbol it folds to -- the harmless direction, recorded rather than glossed.
Confusables that are distinct letters, bidi reordering and interior whitespace
are knowingly left open and asserted open by tests.
## Summary
Adds Sepolia testnet support to AutistMask.
### Changes
- **New `src/shared/networks.js`** — centralized network definitions (mainnet + Sepolia) with chain IDs, default RPC/Blockscout endpoints, and block explorer URLs
- **State management** — `networkId` added to persisted state; defaults to mainnet for backward compatibility
- **Settings UI** — network selector dropdown lets users switch between Ethereum Mainnet and Sepolia Testnet
- **Dynamic explorer links** — all hardcoded `etherscan.io` URLs replaced with dynamic links from the current network config (`sepolia.etherscan.io` for Sepolia)
- **Background service** — `wallet_switchEthereumChain` now accepts both mainnet (0x1) and Sepolia (0xaa36a7); broadcasts `chainChanged` to connected dApps
- **Inpage provider** — fetches chain ID on init and updates dynamically via `chainChanged` events (no more hardcoded `0x1`)
- **Blockscout API** — uses `eth-sepolia.blockscout.com/api/v2` for Sepolia
- **Etherscan labels** — phishing/scam checks use the correct explorer per network
- **Price fetching** — skipped on testnets (testnet tokens have no real market value)
- **RPC validation** — checks against the selected network's chain ID, not hardcoded mainnet
- **ethers provider** — `getProvider()` uses the correct ethers `Network` for Sepolia
### API Endpoints Verified
| Service | Mainnet | Sepolia |
|---------|---------|--------|
| Etherscan | etherscan.io | sepolia.etherscan.io |
| Blockscout | eth.blockscout.com/api/v2 | eth-sepolia.blockscout.com/api/v2 |
| RPC | ethereum-rpc.publicnode.com | ethereum-sepolia-rpc.publicnode.com |
| CoinDesk (prices) | ✅ | N/A (skipped on testnet) |
closes#110
Reviewed-on: #137
THIS WAS ONESHOTTED USING OPUS 4. WTAF
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
When a token's balance entry is missing or incomplete (e.g. not yet
fetched from Blockscout), the address-token view and send view now
fall back to the built-in known token list for symbol, name, and
decimals instead of showing '?'.
Also includes token name in the balance object returned by
fetchTokenBalances so the contract info well can display it.
Fixes#51
Two issues that could cause ENS names to disappear:
1. refreshBalances: on ENS lookup error, addr.ensName was set to null,
wiping any previously resolved name. Now keeps the existing value
on error — only overwrites on successful lookup.
2. ens.js cache: failed lookups were cached as null for 12 hours,
preventing retries even after transient errors resolved. Now skips
caching on failure so subsequent lookups retry immediately.
Added debug logging to ENS reverse lookups in refreshBalances.
Token balances from Blockscout are now filtered before display.
A token only appears if it meets at least one criterion:
- In the known 511-token list (by contract address)
- Explicitly tracked by the user (added via + Token)
- Has >= 1,000 holders on-chain
Also rejects tokens spoofing a known symbol from a different
contract address (same check used for transaction filtering).
This prevents airdropped spam tokens like "OpenClaw" from
appearing in the wallet without the user ever tracking them.
Add debugFetch wrapper in log.js that logs method, URL, and body on
request, and status code on response. Replace all fetch() calls
across balances, transactions, tokens, background RPC proxy, and
settings validation with debugFetch.
Three layers of defense against address poisoning attacks:
1. Known symbol verification: tokens claiming a symbol from the
hardcoded top-250 list (e.g. "ETH", "USDT") but from an
unrecognized contract are identified as spoofs and always hidden.
Their contract addresses are auto-added to the fraud blocklist.
2. Low-holder filtering: tokens with <1000 holders are hidden from
both transaction history and the send token selector. Controlled
by the "Hide tokens with fewer than 1,000 holders" setting.
3. Fraud contract blocklist: a persistent local list of detected
fraud contract addresses. Transactions involving these contracts
are hidden. Controlled by the "Hide transactions from detected
fraud contracts" setting.
Both settings default to on and can be disabled in Settings.
Fetching and filtering are separated: fetchRecentTransactions returns
raw data, filterTransactions is a pure function applying heuristics.
Token holder counts are now passed through from the Blockscout API.
Scanning: check all gap-limit addresses in parallel per batch instead
of sequentially. For a wallet with 1 used address this reduces from
12 sequential RPC round-trips to 1 parallel batch + 1 small follow-up.
Display: add shared formatAddressHtml(address, ensName, maxLen) and
escapeHtml() to helpers.js. Use them in confirm-tx (was missing color
dot entirely) and approval view. Remove duplicate escapeHtml from
addressDetail.js.
Major changes:
- Fetch token balances and tx history from Blockscout API (configurable)
- Remove manual token discovery (discoverTokens) in favor of Blockscout
- HD address gap scanning on mnemonic import
- Duplicate mnemonic detection on wallet add
- EIP-6963 multi-wallet discovery + selectedAddress updates in inpage
- Two-tier balance refresh: 10s while popup open, 60s background
- Fix $0.00 flash before prices load (return null when no prices)
- No-layout-shift: min-height on total value element
- Aligned balance columns (42ch address width, consistent USD column)
- All errors use flash messages instead of off-screen error divs
- Settings gear in global title bar, add-wallet moved to settings pane
- Settings wells with light grey background, configurable Blockscout URL
- Consistent "< Back" buttons top-left on all views
- Address titles (Address 1.1, 1.2, etc.) on main and detail views
- Send view shows current balance of selected asset
- Clickable affordance policy added to README
- Shortened mnemonic backup warning
- Fix broken background script constant imports
Split popup/index.js (784 lines) into focused modules:
- shared/state.js: state management, storage persistence
- shared/wallet.js: mnemonic gen, HD derivation, signing
- shared/prices.js: price cache (5min TTL), USD formatting,
value aggregation (address → wallet → total)
- shared/balances.js: ETH + ERC-20 balance cache (60s TTL),
ENS lookup, token contract metadata lookup
- shared/vault.js: unchanged (libsodium encryption)
- shared/tokens.js: unchanged (token list + CoinDesk client)
- popup/index.js: view switching and event wiring only
Token tracking is now app-wide: trackedTokens stored in state,
balances fetched for all tracked tokens across all addresses.
Add Token now calls the real contract to read name/symbol/decimals.
Total portfolio value shown in 2x type on Home screen.
