fix: a PERMIT2_PERMIT_BATCH, and a permit that cannot be read, state what they allow (closes #652)

A PERMIT2_PERMIT_BATCH was never read, and a PERMIT2_PERMIT whose input
could not be read got no lines, so the approval screen showed nothing of
the allowances either grants.

Each allowance of a batch now gets the three lines a permit whose amount
does not stand gets: Permit2 allowance, Allowance token and Allowance
spender. A permit or batch that cannot be read gets one Permit2 allowance
line reading Unknown (could not be decoded) and leaves no Amount line.
Any batch in the transaction keeps a PERMIT2_PERMIT's amount from
standing. A batch pays nobody, so it no longer adds a Paid to line.
README Transaction Decoding and the TxApproval element list match.

Model: opus-5-5

README.md

@@ -2428,10 +2428,11 @@ view would leave a wallet one click from deletion.
     - Decoded action (if calldata is recognized): action name, token details,
       amounts, what each swap step spends that the `Amount` line does not give,
       what each `PERMIT2_TRANSFER_FROM` moves and where to, what each
-      `PERMIT2_PERMIT` whose amount is not the `Amount` figure lets its spender
+      `PERMIT2_PERMIT` whose amount is not the `Amount` figure, and each
-      take, steps, deadline, and unless a swap pays only the From address, a
+      `PERMIT2_PERMIT_BATCH`, lets its spender take, steps, deadline, and unless
-      `Paid to` line for each other address it pays, or saying that a token
+      a swap pays only the From address, a `Paid to` line for each other address
-      stays in the router or who it pays is unknown (see Transaction Decoding)
+      it pays, or saying that a token stays in the router or who it pays is
+      unknown (see Transaction Decoding)
     - From: color dot + full address + etherscan link
     - Contract: color dot + full address + etherscan link, token symbol label if
       known; for a contract creation, the same sentence as on WaitTx
@@ -3224,38 +3225,39 @@ Currently supported:
   `Unlimited` included, stands as the `Amount` figure in place of the total,
   which it does only in the plain shape of Uniswap's own routes: it comes before
   the step that sets the input side, it is the only `PERMIT2_PERMIT` in the
-  transaction, its spender is the router, the router may not let it fail, no
+  transaction and there is no `PERMIT2_PERMIT_BATCH`, its spender is the router,
-  step before it takes its token or a token the decoder does not know, and the
+  the router may not let it fail, no step before it takes its token or a token
-  decoder reads every step after it in full. Permit2 then lets the router take
+  the decoder does not know, and the decoder reads every step after it in full.
-  no more of the token than that amount, so the permit covers every take of it.
+  Permit2 then lets the router take no more of the token than that amount, so
-  A step the decoder does not read in full may raise what Permit2 lets the
+  the permit covers every take of it. A later permit or batch may raise what
-  router take, as a `PERMIT2_PERMIT_BATCH` can: a command the decoder does not
+  Permit2 lets the router take, and so may a step the decoder does not read in
-  read (listed at the end of this section), a step whose input it cannot read,
+  full: a command the decoder does not read (listed at the end of this section),
-  in whole or in part, and a step it fails on. Every other `PERMIT2_PERMIT`,
+  a step whose input it cannot read, in whole or in part, and a step it fails
-  before the step that sets the input side or after it, leaves `Token In` and
+  on. Every other `PERMIT2_PERMIT`, before the step that sets the input side or
-  the `Amount` line as they read with no permit: a permit of 5,000 DAI to
+  after it, leaves `Token In` and the `Amount` line as they read with no permit:
-  another address and then a V3 exact-in of 600 USDT read `Swap USDT → USDC`
+  a permit of 5,000 DAI to another address and then a V3 exact-in of 600 USDT
-  with `Amount 600.0000 USDT`, and so do that exact-in and then a permit of
+  read `Swap USDT → USDC` with `Amount 600.0000 USDT`, and so do that exact-in
-  5,000 DAI to the router. When a permit's amount stands and the step that sets
+  and then a permit of 5,000 DAI to the router. When a permit's amount stands
-  the input side spends a token other than the permit's, or one the decoder does
+  and the step that sets the input side spends a token other than the permit's,
-  not know, that step's amount gets lines of its own, unless it states no amount
+  or one the decoder does not know, that step's amount gets lines of its own,
-  and the user pays it none of its input token. Each take the total does not
+  unless it states no amount and the user pays it none of its input token. Each
-  count gives three lines after the `Amount` line (after `Token In` when there
+  take the total does not count gives three lines after the `Amount` line (after
-  is none): one of a token other than `Token In`; one of `Token In` after an
+  `Token In` when there is none): one of a token other than `Token In`; one of
-  amount that is not a quantity (a V4 open delta, `ALREADY_PAID`, which keep
+  `Token In` after an amount that is not a quantity (a V4 open delta,
-  their wording on the `Amount` line, or no stated amount, as of a V4 exact-out
+  `ALREADY_PAID`, which keep their wording on the `Amount` line, or no stated
-  step); and one whose amount the decoder does not know. When the step that sets
+  amount, as of a V4 exact-out step); and one whose amount the decoder does not
-  the input side states no amount, the user pays it some of its input token, and
+  know. When the step that sets the input side states no amount, the user pays
-  there is no `Amount` line, that step gets them too whenever another take's
+  it some of its input token, and there is no `Amount` line, that step gets them
-  lines give a figure, or a `PERMIT2_TRANSFER_FROM` of its token gives one, on
+  too whenever another take's lines give a figure, or a `PERMIT2_TRANSFER_FROM`
-  the lines below or, into the router, on its `Paid to` line, so that figure
+  of its token gives one, on the lines below or, into the router, on its
-  cannot read as all that leaves. When it states no amount and the user pays it
+  `Paid to` line, so that figure cannot read as all that leaves. When it states
-  none of its input token, as when the router pays it, that step takes none of
+  no amount and the user pays it none of its input token, as when the router
-  that token from the user's wallet and never gets them, with a permit or
+  pays it, that step takes none of that token from the user's wallet and never
-  without. They come in step order, the step that sets the input side first when
+  gets them, with a permit or without. They come in step order, the step that
-  it has them: `Moved from the sender`, its amount, worded as the `Amount` line
+  sets the input side first when it has them: `Moved from the sender`, its
-  words one, or `Unknown (could not be decoded)` when the decoder does not know
+  amount, worded as the `Amount` line words one, or
-  it; `Token moved`, giving the token's address as the `Token In` line does; and
+  `Unknown (could not be decoded)` when the decoder does not know it;
+  `Token moved`, giving the token's address as the `Token In` line does; and
   `Moved to`, which reads `The swap step that spends it`. A token the decoder
   does not know gives the `Moved from the sender` line alone. A step may also
   take from the user's wallet what the decoder did not read: a V4 step whose
@@ -3284,17 +3286,25 @@ Currently supported:
   giving the token's address as the `Token In` line does; and
   `Allowance spender`, the address it lets take the token. Only a permit whose
   amount stands gives none: the `Amount` line gives its amount, `Token In` its
-  token, and its spender is the router. These lines change neither the `Paid to`
+  token, and its spender is the router. Each allowance a `PERMIT2_PERMIT_BATCH`
-  lines nor the minimum's label. A step goes unread when its recipient does not
+  grants, one for each token it names, all for its one spender, gives the same
-  decode as an address, when it is a V3 swap step whose path is shorter than one
+  three lines, in step order with those of each `PERMIT2_PERMIT`. A
-  token address or has bytes after its last hop, or when it is a command the
+  `PERMIT2_PERMIT` or `PERMIT2_PERMIT_BATCH` whose input the decoder cannot
-  decoder does not read: every command other than `PERMIT2_PERMIT`,
+  read, such as one whose token or spender word has a nonzero top byte, may let
-  `PERMIT2_TRANSFER_FROM`, `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`,
+  any spender take any amount of any token: it gives one `Permit2 allowance`
-  `V3_SWAP_EXACT_IN`, `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`,
+  line alone, reading `Unknown (could not be decoded)`, and leaves no `Amount`
-  `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`,
+  line, whose figure might be too low. These lines change neither the `Paid to`
-  `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
+  lines nor the minimum's label: a permit or batch pays nobody. A step goes
-  (`PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and the NFT commands among
+  unread when its recipient does not decode as an address, when it is a V3 swap
-  them), or a type its release names no command for.
+  step whose path is shorter than one token address or has bytes after its last
+  hop, or when it is a command the decoder does not read: every command other
+  than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`, `PERMIT2_TRANSFER_FROM`,
+  `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`,
+  `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`, `PAY_PORTION`,
+  `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`, `WRAP_ETH`,
+  `UNWRAP_WETH` and `BALANCE_CHECK_ERC20` (`PERMIT2_TRANSFER_FROM_BATCH`,
+  `EXECUTE_SUB_PLAN` and the NFT commands among them), or a type its release
+  names no command for.
 
 ### Non-Goals Forever
 

src/shared/uniswap.js

@@ -336,7 +336,8 @@ const UNNAMED_CURRENCY = "Unknown (not named in the calldata)";
 // currencies, and those commands may name one, so saying the calldata did not
 // name it would be false. The Paid to line uses it too, when a step may pay an
 // address this decoder did not read, and so do the lines for what a step
-// takes from the sender, when this decoder does not know it.
+// takes from the sender, when this decoder does not know it, and for what a
+// permit it could not read allows.
 const UNDECODED_CURRENCY = "Unknown (could not be decoded)";
 
 // The Paid to line for each token paid to the router, the swap's output or
@@ -528,6 +529,32 @@ function decodePermit2(input) {
     }
 }
 
+// Decode PERMIT2_PERMIT_BATCH (command 0x03) input bytes into the allowances
+// it grants, one for each token it names, all for its one spender, in the
+// shape decodePermit2() returns. Each release's
+// `contracts/base/Dispatcher.sol`, at the commit linked for it above, hands
+// Permit2 the batch in this shape.
+// ABI: (((address token, uint160 amount, uint48 expiration, uint48 nonce)[],
+//        address spender, uint256 sigDeadline), bytes signature)
+function decodePermit2Batch(input) {
+    try {
+        const d = coder.decode(
+            [
+                "tuple(tuple(address,uint160,uint48,uint48)[],address,uint256)",
+                "bytes",
+            ],
+            input,
+        );
+        return d[0][0].map((details) => ({
+            token: details[0],
+            amount: details[1],
+            spender: d[0][1],
+        }));
+    } catch {
+        return null;
+    }
+}
+
 // Decode BALANCE_CHECK_ERC20 (command 0x0e) input bytes. The router passes the
 // check when `owner` holds at least `minBalance` of `token`, and reads `owner`
 // as written, without map(), on every release that has the command:
@@ -1214,10 +1241,12 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // The last PERMIT2_PERMIT this decoder read before a step set the
         // input side, or null (see permitStands after the loop).
         let permit = null;
-        // Every PERMIT2_PERMIT this decoder read, before a step set the input
+        // Every allowance a PERMIT2_PERMIT or PERMIT2_PERMIT_BATCH grants,
-        // side or after, in step order, as { token, amount, spender, step }.
+        // before a step set the input side or after, in step order, as
-        // Each whose amount is not the Amount figure gets lines of its own
+        // { token, amount, spender, step }. A permit or batch whose input
-        // (see after the PERMIT2_TRANSFER_FROM lines).
+        // this decoder cannot read is one with a null token, amount and
+        // spender. Each but a permit whose amount is the Amount figure gets
+        // lines of its own (see after the PERMIT2_TRANSFER_FROM lines).
         const permits = [];
         // The index of each step this decoder did not read in full: a
         // command it does not read, a step whose input it cannot read, in
@@ -1322,6 +1351,14 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         const spentUnread = () => {
             userPaid.push({ token: null, amount: null });
         };
+        // A PERMIT2_PERMIT or PERMIT2_PERMIT_BATCH at `step` whose input this
+        // decoder cannot read may let any spender take any amount of any
+        // token: one line says so, and there is no Amount line, whose figure
+        // may then be too low.
+        const permitUnread = (step) => {
+            permits.push({ token: null, amount: null, spender: null, step });
+            stepsUnread.push(step);
+        };
 
         // Who the steps pay, in whichever step and of whatever token.
         // MSG_SENDER is the sender. The router itself, as ADDRESS_THIS or by
@@ -1477,7 +1514,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                         permits.push({ ...p, step: i });
                         keepsRouterWeth = true;
                     } else {
-                        stepsUnread.push(i);
+                        permitUnread(i);
                     }
                     // Only a permit whose amount stands as the Amount figure
                     // names Token In (see permitStands). Every other permit,
@@ -1502,6 +1539,15 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                             beforeEveryTake: !tookBefore,
                         };
                     }
+                } else if (command === "PERMIT2_PERMIT_BATCH") {
+                    // Each allowance it grants gets the lines of a permit
+                    // whose amount does not stand. It pays nobody.
+                    const batch = decodePermit2Batch(inputs[i]);
+                    if (batch) {
+                        permits.push(...batch.map((p) => ({ ...p, step: i })));
+                    } else {
+                        permitUnread(i);
+                    }
                 } else if (command === "PERMIT2_TRANSFER_FROM") {
                     const p = decodePermit2TransferFrom(inputs[i]);
                     if (!p) {
@@ -1910,8 +1956,8 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     }
                 } else {
                     // Any other step may pay an address this decoder does not
-                    // read: PERMIT2_PERMIT_BATCH and the NFT commands among
+                    // read: the NFT commands among them, and a type the
-                    // them, and a type the release names no command for.
+                    // release names no command for.
                     payeeUnread = true;
                     stepsUnread.push(i);
                 }
@@ -1961,17 +2007,19 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // Amount figure in place of the total, which it does only in the
         // plain shape of Uniswap's own routes: it comes before the step that
         // set the input side, it is the only PERMIT2_PERMIT in the
-        // transaction, its spender is the router, the router may not let it
+        // transaction and there is no PERMIT2_PERMIT_BATCH, its spender is
-        // fail, no step before it took its token or one not known, and this
+        // the router, the router may not let it fail, no step before it took
-        // decoder read every step after it in full (see stepsUnread). Permit2
+        // its token or one not known, and this decoder read every step after
-        // then lets the router take no more of the token than that amount, so
+        // it in full (see stepsUnread). Permit2 then lets the router take no
-        // the permit covers every take of it. A later step this decoder did
+        // more of the token than that amount, so the permit covers every take
-        // not read may raise what Permit2 lets the router take, as a
+        // of it. A later permit or batch, or a later step this decoder did
-        // PERMIT2_PERMIT_BATCH can. Every other PERMIT2_PERMIT leaves Token In
+        // not read, may raise what Permit2 lets the router take. Every other
-        // and the Amount line as they read with no permit, and gets lines of
+        // PERMIT2_PERMIT leaves Token In and the Amount line as they read with
-        // its own below. A step that may take from the sender what this decoder
+        // no permit, and gets lines of its own below. A step that may take
-        // did not read leaves no figure, permit or not (see spentUnread()),
+        // from the sender what this decoder did not read leaves no figure,
-        // and an EXECUTE_SUB_PLAN step leaves both sides unknown (below).
+        // permit or not (see spentUnread()), and so does a permit or batch
+        // whose input it cannot read (see permitUnread()). An
+        // EXECUTE_SUB_PLAN step leaves both sides unknown (below).
         const stepCommands = Array.from(
             commandsBytes,
             (b) => commands[b & commandTypeMask],
@@ -1979,6 +2027,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         const permitStands =
             permit !== null &&
             stepCommands.filter((c) => c === "PERMIT2_PERMIT").length === 1 &&
+            !stepCommands.includes("PERMIT2_PERMIT_BATCH") &&
             sameAddress(permit.spender, toAddress) &&
             !permit.allowedToFail &&
             permit.beforeEveryTake &&
@@ -2147,11 +2196,13 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         };
 
         // A null token in `spentFromSender`, a step this decoder did not read
-        // or a token it does not know, leaves no Amount figure, which may
+        // or a token it does not know, and one in `permits`, a permit or
-        // then be too low.
+        // batch it could not read, leave no Amount figure, which may then be
+        // too low.
         if (
             present(inputAmount) &&
-            spentFromSender.every((s) => present(s.token))
+            spentFromSender.every((s) => present(s.token)) &&
+            permits.every((p) => present(p.token))
         ) {
             const amount = spentText(inputAmount, inInfo);
             details.push({
@@ -2201,16 +2252,24 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             );
         }
 
-        // What each PERMIT2_PERMIT lets its spender take: its amount, its
+        // What each allowance of a PERMIT2_PERMIT or PERMIT2_PERMIT_BATCH lets
-        // token and the spender, an address on a line of its own. Permit2's
+        // its spender take: its amount, its token and the spender, an address
-        // maximum is unbounded. Only a permit whose amount stands as the
+        // on a line of its own. Permit2's maximum is unbounded. Only a permit
-        // Amount figure (see permitStands) gets none: that line already gives
+        // whose amount stands as the Amount figure (see permitStands) gets
-        // its amount and Token In its token, and its spender is the router.
+        // none: that line already gives its amount and Token In its token,
-        // Every other permit, one after the step that set the input side
+        // and its spender is the router. Every other allowance, one after the
-        // included, gets these lines, so nothing it lets anyone take goes
+        // step that set the input side included, gets these lines, so nothing
-        // unstated.
+        // it lets anyone take goes unstated. A permit or batch this decoder
+        // could not read gets one line saying so.
         for (const p of permits) {
             if (permitStands && p.step === permit.step) continue;
+            if (!present(p.token)) {
+                details.push({
+                    label: "Permit2 allowance",
+                    value: UNDECODED_CURRENCY,
+                });
+                continue;
+            }
             details.push({
                 label: "Permit2 allowance",
                 value:

tests/uniswap.test.js

@@ -59,6 +59,25 @@ function encodePermit2(token, amount, spender) {
     );
 }
 
+// Helper: encode a PERMIT2_PERMIT_BATCH input (command 0x03), one allowance
+// for each [token, amount], all for `spender`
+function encodePermit2Batch(allowances, spender) {
+    return coder.encode(
+        [
+            "tuple(tuple(address,uint160,uint48,uint48)[],address,uint256)",
+            "bytes",
+        ],
+        [
+            [
+                allowances.map(([token, amount]) => [token, amount, 0, 0]),
+                spender,
+                9999999999,
+            ],
+            "0x1234",
+        ],
+    );
+}
+
 // Helper: encode a BALANCE_CHECK_ERC20 input (command 0x0e)
 function encodeBalanceCheck(owner, token, minBalance) {
     return coder.encode(
@@ -2100,28 +2119,17 @@ describe("uniswap decoder", () => {
             ROUTER_ADDR,
         );
 
-        // A PERMIT2_PERMIT_BATCH, which this decoder does not read, may raise
+        // A PERMIT2_PERMIT_BATCH may raise what the router may take of the
-        // what the router may take of the permit's token again.
+        // permit's token again, and its allowance gets lines of its own.
         test("a split after a PERMIT2_PERMIT and a PERMIT2_PERMIT_BATCH shows the total the steps take", () => {
-            const permitBatch = coder.encode(
-                [
-                    "tuple(tuple(address,uint160,uint48,uint48)[],address,uint256)",
-                    "bytes",
-                ],
-                [
-                    [
-                        [[USDT_ADDR, 10000000000n, 0, 0]], // 10,000 USDT
-                        ROUTER_ADDR,
-                        9999999999,
-                    ],
-                    "0x1234",
-                ],
-            );
             const result = decodeSteps(
                 [0x0a, 0x03, 0x00, 0x08],
                 [
                     encodePermit2(USDT_ADDR, USDT_600, ROUTER_ADDR),
-                    permitBatch,
+                    encodePermit2Batch(
+                        [[USDT_ADDR, 10000000000n]], // 10,000 USDT
+                        ROUTER_ADDR,
+                    ),
                     V3_600,
                     encodeV2SwapExactIn(USER_ADDR, 9400000000n, 1n, [
                         USDT_ADDR,
@@ -2132,6 +2140,12 @@ describe("uniswap decoder", () => {
             expect(linesBetweenTokens(result)).toEqual([
                 ["Amount", "10000.0000 USDT"],
                 ...USDT_600_LINES,
+                ...permitLines(
+                    "10000.0000 USDT",
+                    USDT_ADDR,
+                    "USDT",
+                    ROUTER_ADDR,
+                ),
             ]);
         });
 
@@ -2418,6 +2432,121 @@ describe("uniswap decoder", () => {
             });
         });
 
+        // https://git.eeqj.de/sneak/AutistMask/issues/652 — a
+        // PERMIT2_PERMIT_BATCH, and a PERMIT2_PERMIT this decoder cannot read,
+        // showed nothing of what they allow. Each allowance a batch grants now
+        // gets the lines of a permit whose amount does not stand, and a permit
+        // or batch that cannot be read gets one line saying so and leaves no
+        // Amount figure.
+        describe("a PERMIT2_PERMIT_BATCH, or a permit that cannot be read", () => {
+            const USDT_5000 = 5000000000n;
+            const DAI_5000 = 5000000000000000000000n;
+            const MAX_UINT160 = 2n ** 160n - 1n;
+
+            // A batch names one spender for all its allowances.
+            test.each([
+                { kind: "the router", spender: ROUTER_ADDR },
+                { kind: "another spender", spender: OTHER_ADDR },
+            ])(
+                "a PERMIT2_PERMIT_BATCH of 5,000 USDT and unlimited DAI to $kind, then a V3 exact-in of 600 USDT, shows each allowance",
+                ({ spender }) => {
+                    const result = decodeSteps(
+                        [0x03, 0x00],
+                        [
+                            encodePermit2Batch(
+                                [
+                                    [USDT_ADDR, USDT_5000],
+                                    [DAI_ADDR, MAX_UINT160],
+                                ],
+                                spender,
+                            ),
+                            V3_600,
+                        ],
+                    );
+                    expect(result.name).toBe("Swap USDT → USDC");
+                    expect(linesBetweenTokens(result)).toEqual([
+                        ["Amount", "600.0000 USDT"],
+                        ...permitLines(
+                            "5000.0000 USDT",
+                            USDT_ADDR,
+                            "USDT",
+                            spender,
+                        ),
+                        ...permitLines("Unlimited", DAI_ADDR, "DAI", spender),
+                    ]);
+                    // A batch pays nobody, so the swap's minimum is what the
+                    // sender receives.
+                    expect(detail(result, "Paid to")).toBeUndefined();
+                    expect(detail(result, "Min. received").value).toBe(
+                        "590.0000 USDC",
+                    );
+                },
+            );
+
+            // A batch keeps a PERMIT2_PERMIT's amount from standing as the
+            // Amount figure, before the permit as after it.
+            test("a PERMIT2_PERMIT_BATCH of 5,000 DAI, then a PERMIT2_PERMIT of 5,000 USDT to the router and a V3 exact-in of 600 USDT, shows the swap's 600 USDT and both permits' lines", () => {
+                const result = decodeSteps(
+                    [0x03, 0x0a, 0x00],
+                    [
+                        encodePermit2Batch([[DAI_ADDR, DAI_5000]], ROUTER_ADDR),
+                        encodePermit2(USDT_ADDR, USDT_5000, ROUTER_ADDR),
+                        V3_600,
+                    ],
+                );
+                expect(linesBetweenTokens(result)).toEqual([
+                    ["Amount", "600.0000 USDT"],
+                    ...permitLines(
+                        "5000.0000 DAI",
+                        DAI_ADDR,
+                        "DAI",
+                        ROUTER_ADDR,
+                    ),
+                    ...permitLines(
+                        "5000.0000 USDT",
+                        USDT_ADDR,
+                        "USDT",
+                        ROUTER_ADDR,
+                    ),
+                ]);
+            });
+
+            // The permit's token word, and the batch's spender word, have a
+            // nonzero top byte.
+            test.each([
+                {
+                    kind: "a PERMIT2_PERMIT",
+                    command: 0x0a,
+                    input: dirtyWord(
+                        encodePermit2(USDT_ADDR, USDT_5000, ROUTER_ADDR),
+                        0,
+                    ),
+                },
+                {
+                    kind: "a PERMIT2_PERMIT_BATCH",
+                    command: 0x03,
+                    input: dirtyWord(
+                        encodePermit2Batch(
+                            [[USDT_ADDR, USDT_5000]],
+                            ROUTER_ADDR,
+                        ),
+                        3,
+                    ),
+                },
+            ])(
+                "$kind that cannot be read, then a V3 exact-in of 600 USDT, says its allowances could not be decoded and shows no Amount figure",
+                ({ command, input }) => {
+                    const result = decodeSteps(
+                        [command, 0x00],
+                        [input, V3_600],
+                    );
+                    expect(linesBetweenTokens(result)).toEqual([
+                        ["Permit2 allowance", UNDECODED],
+                    ]);
+                },
+            );
+        });
+
         // A V3_SWAP_EXACT_OUT whose path is shorter than one token cannot be
         // read. It may pay any address and take from the sender, so it
         // leaves no Amount figure.