fix: the approval screen names the address a swap's output is paid to (closes #594)

The swap decoder read no recipient, so a swap paying its output to another
address still showed Min. received. It now reads the recipient of every swap
step, SWEEP, UNWRAP_WETH, V4 TAKE and TAKE_ALL, reads the router's
placeholders as the router does (address(1) is the sender, address(2) the
router, which holds the output until a later SWEEP or UNWRAP_WETH pays it
out), and compares the result with the transaction's sender. When the output
goes anywhere else, a Paid to line names each address it is paid to and the
minimum reads Min. paid out. The approval and transaction detail screens pass
the sender in.

Model: opus-5-5

README.md

@@ -1144,8 +1144,9 @@ fetched, without that cross-address check, and shows the row's figure.
 
 **Decoded amount lines on the transaction approval screen:** the `Amount` line
 of a decoded ERC-20 call, and the `Amount` and `Min. received` lines of a
-decoded swap (see TxApproval below), do not always read as a number. They can
+decoded swap (see TxApproval below; `Min. received` reads `Min. paid out` when
-read:
+the output is paid to another address, see Transaction Decoding), do not always
+read as a number. They can read:
 
 - A formatted quantity, e.g. `17.1900 USDT`, when the token's scale is known:
   truncated to four decimals, with the floor and the zero cases described above.
@@ -2279,7 +2280,9 @@ view would leave a wallet one click from deletion.
     - Site origin (bold, scheme and port included) + "wants to send a
       transaction"
     - Decoded action (if calldata is recognized): action name, token details,
-      amounts, steps, deadline (see Transaction Decoding)
+      amounts, steps, deadline, and for a swap whose output is paid to an
+      address other than the From address, each address it is paid to (see
+      Transaction Decoding)
     - From: color dot + full address + etherscan link
     - Contract: color dot + full address + etherscan link, token symbol label if
       known; for a contract creation, the same sentence as on WaitTx
@@ -2914,7 +2917,24 @@ Currently supported:
   listed as `Execute Sub-Plan (its steps are not shown)`, and whatever the other
   steps state, the summary names no swap direction, `Token In` and `Token Out`
   read `Unknown (could not be decoded)`, and there is no `Amount` or
-  `Min. received` line.
+  `Min. received` line. Each swap step, `SWEEP`, `UNWRAP_WETH` and V4 `TAKE`
+  names the address it pays, and `TAKE_ALL` pays the transaction's sender. The
+  router reads two of those addresses as placeholders: `address(1)` is the
+  transaction's sender, and `address(2)` is the router itself, which holds what
+  it is paid until a later step pays it out. The output is paid to the address
+  of the step that sets the output side (for a V4 step, of every `TAKE` and
+  `TAKE_ALL` of its output currency), or, when no step sets it, of the
+  `UNWRAP_WETH` that makes `Token Out` ETH. While the router holds it, the next
+  `SWEEP` of the output token, or `UNWRAP_WETH` of a WETH output, pays it to
+  that step's address. A `BALANCE_CHECK_ERC20` step pays nothing and leaves the
+  address as it was. An output nothing pays out is paid to the router. When the
+  output is paid to any address other than the transaction's sender (the From
+  address on TxApproval, the sender the explorer reports on TransactionDetail),
+  a `Paid to` line after `Token Out` names each address it is paid to, the
+  sender's included, and `Min. received` reads `Min. paid out`. A swap paid to
+  the sender, directly or through the router, has neither. The decoder does not
+  read `TRANSFER`, `PAY_PORTION` or V4 `TAKE_PORTION`, each of which pays an
+  amount or a share to an address of its own.
 
 ### Non-Goals Forever
 

src/popup/views/approval.js

@@ -79,10 +79,10 @@ function tokenAmountText(rawAmount, decimals, symbol) {
     };
 }
 
-// Try to decode calldata sent to `toAddress` on the network with chain id
+// Try to decode calldata sent from `fromAddress` to `toAddress` on the network
-// `chainId`, using known ABIs.
+// with chain id `chainId`, using known ABIs.
 // Returns { name, description, details } or null.
-function decodeCalldata(data, toAddress, chainId) {
+function decodeCalldata(data, toAddress, chainId, fromAddress) {
     if (!data || data === "0x" || data.length < 10) return null;
 
     // Where a token's scale is looked for, for every decoder below: the ERC-20
@@ -191,6 +191,7 @@ function decodeCalldata(data, toAddress, chainId) {
         toAddress,
         chainId,
         decimalsSources,
+        fromAddress,
     );
     if (routerResult) return routerResult;
 
@@ -277,11 +278,12 @@ function showTxApproval(details) {
 
     // If this is an ERC-20 call, try to extract the real recipient and amount.
     // Decoded for the network the transaction is for, which the Network line
-    // names.
+    // names, and the address the From line names.
     const decoded = decodeCalldata(
         approvedTx.data,
         toAddr || "",
         approvedTx.chainId,
+        details.approvedFrom,
     );
     if (decoded && decoded.details) {
         // The asset the status summary is counted in: an ERC-20 call's Token

src/popup/views/transactionDetail.js

@@ -316,11 +316,13 @@ async function loadFullTxDetails(txHash, chainId) {
         // Decoded against the address the transaction was sent to, as the
         // explorer reports it, not the history entry's `to`: for a token
         // transfer that is the transfer's recipient, not the token contract.
-        // On the active network, the one whose explorer was just asked.
+        // On the active network, the one whose explorer was just asked, and
+        // from the sender it reports.
         const decoded = decodeCalldata(
             inputData,
             txData.to?.hash || "",
             currentNetwork().chainId,
+            txData.from?.hash || "",
         );
         if (decoded) {
             // Render decoded calldata matching approval view style

src/shared/uniswap.js

@@ -8,6 +8,7 @@ const {
     resolveTokenSymbol,
     unknownDecimalsAmount,
 } = require("./approvalAmount");
+const { sameAddress } = require("./approvalVerify");
 const { NETWORKS } = require("./networks");
 
 const coder = AbiCoder.defaultAbiCoder();
@@ -179,6 +180,33 @@ const WETH_ADDRESSES = [
     "0xfff9976782d46cc05630d1f6ebab18b2324d6b14",
 ];
 
+function isWeth(address) {
+    return present(address) && WETH_ADDRESSES.includes(address.toLowerCase());
+}
+
+// Two recipient values the router reads as placeholders, not as addresses:
+// MSG_SENDER pays the caller of execute(), which is the transaction's sender,
+// and ADDRESS_THIS pays the router itself, which holds the output until a
+// later step pays it out. The swap commands, SWEEP and UNWRAP_WETH map their
+// recipient through the dispatcher's map(), and a V4 TAKE through V4Router's
+// _mapRecipient(); TAKE_ALL always pays the caller.
+// - constants: https://github.com/Uniswap/universal-router/blob/cda697da221e24ca143bc4f55023694a2a16796f/contracts/libraries/Constants.sol
+// - map(), UniversalRouterV1: https://github.com/Uniswap/universal-router/blob/cda697da221e24ca143bc4f55023694a2a16796f/contracts/libraries/Recipient.sol
+// - map(), UniversalRouterV2: https://github.com/Uniswap/universal-router/blob/3663f6db6e2fe121753cd2d899699c2dc75dca86/contracts/base/Dispatcher.sol
+// - constants, V4: https://github.com/Uniswap/v4-periphery/blob/444c526b77d804590f0d7bc5a481af5a3277c952/src/libraries/ActionConstants.sol
+// - _mapRecipient(): https://github.com/Uniswap/v4-periphery/blob/444c526b77d804590f0d7bc5a481af5a3277c952/src/base/BaseActionsRouter.sol
+// - TAKE and TAKE_ALL: https://github.com/Uniswap/v4-periphery/blob/444c526b77d804590f0d7bc5a481af5a3277c952/src/V4Router.sol
+const MSG_SENDER = "0x0000000000000000000000000000000000000001";
+const ADDRESS_THIS = "0x0000000000000000000000000000000000000002";
+
+// The address a command's `recipient` pays, read as the router reads it, for a
+// transaction from `sender` to the router at `router`.
+function recipientAddress(recipient, sender, router) {
+    if (sameAddress(recipient, MSG_SENDER)) return sender;
+    if (sameAddress(recipient, ADDRESS_THIS)) return router;
+    return recipient;
+}
+
 // `decimals` is null when nothing knows this token's scale. It is not
 // defaulted to 18: the swap lines land on the same approval screen as the
 // ERC-20 line, and a scale guessed there is what showed a 1,000 USDT swap as
@@ -265,6 +293,7 @@ function decodeV2SwapExactIn(input) {
             input,
         );
         return {
+            recipient: d[0],
             amountIn: d[1] === 0n ? ALREADY_PAID : d[1],
             amountOutMin: d[2],
             tokenIn: d[3][0],
@@ -285,6 +314,7 @@ function decodeV2SwapExactOut(input) {
             input,
         );
         return {
+            recipient: d[0],
             amountOut: d[1],
             amountInMax: d[2],
             tokenIn: d[3][0],
@@ -316,6 +346,7 @@ function decodeV3SwapExactIn(input) {
         const path = decodeV3Path(d[3]);
         if (!path) return null;
         return {
+            recipient: d[0],
             amountIn: d[1],
             amountOutMin: d[2],
             tokenIn: path.tokenIn,
@@ -326,6 +357,30 @@ function decodeV3SwapExactIn(input) {
     }
 }
 
+// Decode SWEEP (command 0x04) input bytes. The router pays its whole balance
+// of `token` to the recipient.
+// ABI: (address token, address recipient, uint256 amountMin)
+function decodeSweep(input) {
+    try {
+        const d = coder.decode(["address", "address", "uint256"], input);
+        return { token: d[0], recipient: d[1] };
+    } catch {
+        return null;
+    }
+}
+
+// Decode UNWRAP_WETH (command 0x0c) input bytes. The router turns its whole
+// WETH balance into ETH and pays it to the recipient.
+// ABI: (address recipient, uint256 amountMin)
+function decodeUnwrapWeth(input) {
+    try {
+        const d = coder.decode(["address", "uint256"], input);
+        return { recipient: d[0] };
+    } catch {
+        return null;
+    }
+}
+
 // Decode WRAP_ETH (command 0x0b) input bytes.
 // ABI: (address recipient, uint256 amount)
 function decodeWrapEth(input) {
@@ -500,6 +555,10 @@ function totalAmount(amounts) {
 // these rules leave unknown is set unknown, with no figure. A step with no
 // swap action sets only the sides SETTLE, SETTLE_ALL, TAKE and TAKE_ALL
 // name.
+//
+// `outputRecipients` is the recipient of every TAKE and TAKE_ALL of Token
+// Out, as written in the calldata (see recipientAddress()), TAKE_ALL's as
+// MSG_SENDER. It is empty when none takes Token Out.
 function decodeV4Swap(input) {
     try {
         const d = coder.decode(["bytes", "bytes[]"], input);
@@ -508,6 +567,8 @@ function decodeV4Swap(input) {
 
         let settleToken = null;
         let takeToken = null;
+        // Every TAKE and TAKE_ALL, as { currency, recipient }.
+        const takes = [];
         // The step's swap actions that could be read, as decodeV4SwapAction()
         // reads them.
         const swaps = [];
@@ -537,10 +598,12 @@ function decodeV4Swap(input) {
                         params[i],
                     );
                     takeToken = t[0];
+                    takes.push({ currency: t[0], recipient: t[1] });
                 } else if (actionId === V4_TAKE_ALL) {
                     // TAKE_ALL: (address currency, uint256 minAmount)
                     const t = coder.decode(["address", "uint256"], params[i]);
                     takeToken = t[0];
+                    takes.push({ currency: t[0], recipient: MSG_SENDER });
                 } else if (
                     actionId === V4_SWAP_EXACT_IN_SINGLE ||
                     actionId === V4_SWAP_EXACT_IN ||
@@ -558,6 +621,11 @@ function decodeV4Swap(input) {
             }
         }
 
+        const recipientsOf = (currency) =>
+            takes
+                .filter((t) => sameAddress(t.currency, currency))
+                .map((t) => t.recipient);
+
         // Rule 3.
         if (swapUndecoded) {
             return {
@@ -565,6 +633,7 @@ function decodeV4Swap(input) {
                 tokenOut: takeToken,
                 amountIn: null,
                 amountOutMin: null,
+                outputRecipients: recipientsOf(takeToken),
                 swapUndecoded,
                 hasSwapAction: true,
             };
@@ -604,6 +673,7 @@ function decodeV4Swap(input) {
             tokenOut,
             amountIn,
             amountOutMin,
+            outputRecipients: recipientsOf(tokenOut),
             swapUndecoded,
             hasSwapAction: swaps.length > 0,
         };
@@ -612,14 +682,14 @@ function decodeV4Swap(input) {
     }
 }
 
-// Try to decode a Universal Router execute() call sent to `toAddress` on the
+// Try to decode a Universal Router execute() call sent from `fromAddress`, the
-// network with chain id `chainId`.
+// user, to `toAddress` on the network with chain id `chainId`.
 // Returns { name, description, details } matching the format used by
 // the approval UI, or null if the calldata is not a recognised execute() or
 // `toAddress` is not a Universal Router on that network: the same calldata
 // sent to any other contract is not a swap through the router, whatever that
 // contract does with it.
-function decode(data, toAddress, chainId, sources) {
+function decode(data, toAddress, chainId, sources, fromAddress) {
     const commandTypeMask = routerCommandTypeMask(toAddress, chainId);
     if (commandTypeMask === null) return null;
     try {
@@ -636,6 +706,9 @@ function decode(data, toAddress, chainId, sources) {
         let outputToken = null;
         let minOutput = null;
         let outputEstablished = false;
+        // The addresses the output side is paid to, each read as the router
+        // reads it (see recipientAddress()). Empty when no step read says.
+        let outputPaidTo = [];
         let hasUnwrapWeth = false;
         let hasV2ExactOut = false;
         let swapUndecoded = false;
@@ -671,12 +744,24 @@ function decode(data, toAddress, chainId, sources) {
             if (!present(token) && !present(amount)) return;
             setInput(token, amount);
         };
-        const setOutput = (token, amount) => {
+        // The step that sets the output side also says who it is paid to.
+        const setOutput = (token, amount, addresses) => {
             if (!present(token) && !present(amount)) return;
             outputToken = present(token) ? token : null;
             minOutput = present(amount) ? amount : null;
+            outputPaidTo = addresses;
             outputEstablished = true;
         };
+        const paidTo = (recipients) =>
+            recipients.map((r) => recipientAddress(r, fromAddress, toAddress));
+        // SWEEP and UNWRAP_WETH pay out the router's whole balance, so an
+        // output the router holds goes to their recipient.
+        const payOutFromRouter = (recipient) => {
+            const [address] = paidTo([recipient]);
+            outputPaidTo = outputPaidTo.map((a) =>
+                sameAddress(a, toAddress) ? address : a,
+            );
+        };
 
         for (let i = 0; i < commandsBytes.length; i++) {
             const cmdId = commandsBytes[i] & commandTypeMask;
@@ -708,8 +793,9 @@ function decode(data, toAddress, chainId, sources) {
                     // least minBalance, so a zero one guarantees nothing and
                     // does not replace a minimum an earlier step stated. Any
                     // other minBalance sets the output side as a swap does.
+                    // It pays nobody, so who the output is paid to stays.
                     if (b && !(b.minBalance === 0n && present(minOutput))) {
-                        setOutput(b.token, b.minBalance);
+                        setOutput(b.token, b.minBalance, outputPaidTo);
                     }
                 }
 
@@ -720,7 +806,11 @@ function decode(data, toAddress, chainId, sources) {
                         // Always update output: in multi-step swaps (V3 → V4),
                         // the last swap step determines the final output token
                         // and minimum received amount.
-                        setOutput(s.tokenOut, s.amountOutMin);
+                        setOutput(
+                            s.tokenOut,
+                            s.amountOutMin,
+                            paidTo([s.recipient]),
+                        );
                     }
                 }
 
@@ -728,7 +818,11 @@ function decode(data, toAddress, chainId, sources) {
                     const s = decodeV2SwapExactIn(inputs[i]);
                     if (s) {
                         setInputOnce(s.tokenIn, s.amountIn);
-                        setOutput(s.tokenOut, s.amountOutMin);
+                        setOutput(
+                            s.tokenOut,
+                            s.amountOutMin,
+                            paidTo([s.recipient]),
+                        );
                     }
                 }
 
@@ -738,7 +832,18 @@ function decode(data, toAddress, chainId, sources) {
                     const s = decodeV2SwapExactOut(inputs[i]);
                     if (s) {
                         setInputOnce(s.tokenIn, s.amountInMax);
-                        setOutput(s.tokenOut, s.amountOut);
+                        setOutput(
+                            s.tokenOut,
+                            s.amountOut,
+                            paidTo([s.recipient]),
+                        );
+                    }
+                }
+
+                if (cmdId === 0x04) {
+                    const s = decodeSweep(inputs[i]);
+                    if (s && sameAddress(s.token, outputToken)) {
+                        payOutFromRouter(s.recipient);
                     }
                 }
 
@@ -775,6 +880,7 @@ function decode(data, toAddress, chainId, sources) {
                         }
                         outputToken = v4.tokenOut;
                         minOutput = v4.amountOutMin;
+                        outputPaidTo = paidTo(v4.outputRecipients);
                         outputEstablished = true;
                     } else if (v4) {
                         // A step with no swap action sets only the sides its
@@ -782,12 +888,24 @@ function decode(data, toAddress, chainId, sources) {
                         // setInputOnce() and setOutput() leave alone a side
                         // whose two halves are both unstated.
                         setInputOnce(v4.tokenIn, v4.amountIn);
-                        setOutput(v4.tokenOut, v4.amountOutMin);
+                        setOutput(
+                            v4.tokenOut,
+                            v4.amountOutMin,
+                            paidTo(v4.outputRecipients),
+                        );
                     }
                 }
 
                 if (cmdId === 0x0c) {
                     hasUnwrapWeth = true;
+                    // It pays out the output when that is WETH, and when no
+                    // step has set the output side: see the ETH output below.
+                    const u = decodeUnwrapWeth(inputs[i]);
+                    if (u && !outputEstablished) {
+                        outputPaidTo = paidTo([u.recipient]);
+                    } else if (u && isWeth(outputToken)) {
+                        payOutFromRouter(u.recipient);
+                    }
                 }
             } catch {
                 // Skip commands we can't decode
@@ -804,6 +922,7 @@ function decode(data, toAddress, chainId, sources) {
             inputAmount = null;
             outputToken = null;
             minOutput = null;
+            outputPaidTo = [];
             outputEstablished = true;
         }
 
@@ -816,12 +935,9 @@ function decode(data, toAddress, chainId, sources) {
         // even when it set it unknown. Any other output keeps its own token
         // and figure: a swap that buys USDC and then unwraps the WETH it did
         // not spend receives USDC.
-        const outputIsWeth =
-            present(outputToken) &&
-            WETH_ADDRESSES.includes(outputToken.toLowerCase());
         const inInfo = tokenInfo(inputToken, sources);
         const outInfo =
-            hasUnwrapWeth && (outputIsWeth || !outputEstablished)
+            hasUnwrapWeth && (isWeth(outputToken) || !outputEstablished)
                 ? { symbol: "ETH", decimals: 18, address: null }
                 : tokenInfo(outputToken, sources);
 
@@ -936,6 +1052,22 @@ function decode(data, toAddress, chainId, sources) {
             });
         }
 
+        // When any address the output is paid to is not the user's, each one
+        // is named, the user's own included, and the output is not said to be
+        // received. An output the router still holds is paid to the router.
+        const paidElsewhere = outputPaidTo.some(
+            (a) => !sameAddress(a, fromAddress),
+        );
+        if (paidElsewhere) {
+            const named = outputPaidTo.filter(
+                (a, i) =>
+                    outputPaidTo.findIndex((b) => sameAddress(a, b)) === i,
+            );
+            for (const address of named) {
+                details.push({ label: "Paid to", value: address, address });
+            }
+        }
+
         if (present(minOutput)) {
             // A zero floor is the one case the user most needs stated: the
             // swap guarantees nothing back. It is said in words, in the same
@@ -944,7 +1076,7 @@ function decode(data, toAddress, chainId, sources) {
             // return nothing" — and because it is true at every scale, so it
             // holds even when the output token's decimals are unknown.
             details.push({
-                label: "Min. received",
+                label: paidElsewhere ? "Min. paid out" : "Min. received",
                 value:
                     minOutput === 0n
                         ? NO_MINIMUM

tests/approvalDisplayFloor.test.js

@@ -68,10 +68,13 @@ function swapData(amountIn, amountOutMin) {
 }
 
 function swapDetail(amountIn, amountOutMin, label) {
+    // Sent by the address the swap pays, so the output is the user's.
     const decoded = uniswap.decode(
         swapData(amountIn, amountOutMin),
         ROUTER,
         "0x1",
+        {},
+        RECIPIENT,
     );
     return decoded.details.find((d) => d.label === label);
 }

tests/uniswap.test.js

@@ -332,7 +332,13 @@ describe("uniswap decoder", () => {
     });
 
     test("decodes first-ever AutistMask swap (PERMIT2_PERMIT + V4_SWAP)", () => {
-        const result = uniswap.decode(FIRST_SWAP_CALLDATA, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(
+            FIRST_SWAP_CALLDATA,
+            ROUTER_ADDR,
+            "0x1",
+            {},
+            USER_ADDR,
+        );
 
         expect(result).not.toBeNull();
         expect(result.name).toBe("Swap USDT \u2192 ETH");
@@ -373,6 +379,8 @@ describe("uniswap decoder", () => {
                 v4SwapCalldata(id, deployed),
                 ROUTER_ADDR,
                 "0x1",
+                {},
+                USER_ADDR,
             );
             expect(detail(result, "Steps").value).toBe("V4 Swap");
         },
@@ -389,6 +397,8 @@ describe("uniswap decoder", () => {
                 v4SwapCalldata(id, newer),
                 ROUTER_ADDR,
                 "0x1",
+                {},
+                USER_ADDR,
             );
             expect(detail(result, "Amount")).toBeUndefined();
             expect(detail(result, "Min. received")).toBeUndefined();
@@ -419,7 +429,13 @@ describe("uniswap decoder", () => {
                 ],
                 9999999999n,
             );
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(detail(result, "Steps").value).toBe(
                 "V4 Swap (could not be decoded)",
             );
@@ -440,7 +456,13 @@ describe("uniswap decoder", () => {
                 [encodeV4Swap(new Uint8Array([id]), [newer])],
                 9999999999n,
             );
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(detail(result, "Steps").value).toBe(
                 "V4 Swap (could not be decoded)",
             );
@@ -470,7 +492,13 @@ describe("uniswap decoder", () => {
                 ],
                 9999999999n,
             );
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(result.name).toBe("Uniswap Swap");
             expect(detail(result, "Amount").value).toBe("2.0000 USDT");
             expect(detail(result, "Token Out").value).toBe(
@@ -498,7 +526,13 @@ describe("uniswap decoder", () => {
                 ],
                 9999999999n,
             );
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(result.name).toBe("Uniswap Swap");
             expect(detail(result, "Token In").value).toBe(
                 "Unknown (could not be decoded)",
@@ -520,7 +554,7 @@ describe("uniswap decoder", () => {
             ],
             9999999999n,
         );
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(detail(result, "Token Out").value).toBe(
             "Unknown (could not be decoded)",
         );
@@ -540,7 +574,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         expect(result.name).toBe("Swap USDT \u2192 WETH");
 
@@ -567,7 +601,7 @@ describe("uniswap decoder", () => {
             1767225600n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Swap USDC → WETH");
         expect(detail(result, "Token In").address).toBe(USDC_ADDR);
         expect(detail(result, "Token Out").address).toBe(WETH_ADDR);
@@ -599,7 +633,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Swap ETH → USDC");
 
         const amount = detail(result, "Amount");
@@ -628,7 +662,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Swap USDC → ETH");
         expect(detail(result, "Amount").value).toBe("Up to 1500.0000 USDC");
         expect(detail(result, "Token Out").value).toBe("ETH");
@@ -671,7 +705,13 @@ describe("uniswap decoder", () => {
                 9999999999n,
             );
 
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(detail(result, "Token Out").address).toBe(tokenOut);
             expect(detail(result, "Min. received").value).toBe(minReceived);
         },
@@ -692,7 +732,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Swap USDT → USDC");
         expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
         expect(detail(result, "Min. received").value).toBe("1.9000 USDC");
@@ -725,7 +765,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(detail(result, "Token Out").value).toBe("ETH");
         expect(detail(result, "Min. received").value).toBe("0.4000 ETH");
     });
@@ -744,7 +784,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(detail(result, "Token Out").value).toBe("ETH");
         expect(detail(result, "Min. received").value).toBe("0.0005 ETH");
     });
@@ -769,7 +809,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(detail(result, "Token Out").value).toBe(
             "Unknown (not named in the calldata)",
         );
@@ -792,7 +832,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         expect(result.name).toBe("Swap USDT \u2192 WETH");
     });
@@ -804,7 +844,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         const tokenIn = result.details.find((d) => d.label === "Token In");
@@ -827,7 +867,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         // UNWRAP_WETH means output is native ETH
         expect(result.name).toBe("Swap USDT \u2192 ETH");
@@ -843,7 +883,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         const minOut = result.details.find((d) => d.label === "Min. received");
@@ -863,7 +903,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         // The V4 swap action's parameters are empty, so that step is said to
@@ -943,7 +983,13 @@ describe("uniswap decoder", () => {
                 [subPlan],
                 9999999999n,
             );
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(result.name).toBe("Uniswap Swap");
             expect(detail(result, "Steps").value).toBe(
                 "Execute Sub-Plan (its steps are not shown)",
@@ -1031,7 +1077,13 @@ describe("uniswap decoder", () => {
         "$beside an EXECUTE_SUB_PLAN step does not name either side",
         ({ commands, inputs, steps }) => {
             const data = buildExecute(commands, inputs, 9999999999n);
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(detail(result, "Steps").value).toBe(steps);
             expect(result.name).toBe("Uniswap Swap");
             expect(detail(result, "Token In").value).toBe(
@@ -1046,7 +1098,13 @@ describe("uniswap decoder", () => {
     );
 
     test("shows the deadline as a UTC date and time", () => {
-        const result = uniswap.decode(FIRST_SWAP_CALLDATA, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(
+            FIRST_SWAP_CALLDATA,
+            ROUTER_ADDR,
+            "0x1",
+            {},
+            USER_ADDR,
+        );
         expect(detail(result, "Deadline").value).toBe("2026-02-27 08:25:51");
     });
 
@@ -1064,7 +1122,7 @@ describe("uniswap decoder", () => {
             2n ** 256n - 1n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         expect(result.name).toBe("Swap USDT \u2192 WETH");
         expect(detail(result, "Deadline").value).toBe(
@@ -1079,7 +1137,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         const amount = result.details.find((d) => d.label === "Amount");
@@ -1154,7 +1212,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         // Before decodeV4Swap fix: name would be "Swap USDT → ETH" or "Uniswap Swap"
         // After fix: correctly identifies both tokens from V4 sub-actions
@@ -1188,7 +1246,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         // The amount and the token it is counted in come from the same hop.
@@ -1228,7 +1286,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token Out").value).toBe(
@@ -1273,7 +1331,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token Out").value).toContain("USDC");
@@ -1302,7 +1360,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token Out").value).toContain("USDC");
@@ -1339,7 +1397,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token In").value).toContain("WETH");
@@ -1532,7 +1590,13 @@ describe("uniswap decoder", () => {
                 9999999999n,
             );
 
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(result.name).toBe("Swap USDT → USDC");
             expect(detail(result, "Token In").address).toBe(USDT_ADDR);
             expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
@@ -1584,7 +1648,13 @@ describe("uniswap decoder", () => {
                 9999999999n,
             );
 
-            const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
             expect(detail(result, "Steps").value).toBe(
                 "V4 Swap (could not be decoded)",
             );
@@ -1643,7 +1713,7 @@ describe("uniswap decoder", () => {
             ],
             9999999999n,
         );
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Uniswap Swap");
         expect(detail(result, "Token In").address).toBe(
             USDT_ADDR.toLowerCase(),
@@ -1699,7 +1769,7 @@ describe("uniswap decoder", () => {
             ],
             9999999999n,
         );
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Uniswap Swap");
         expect(detail(result, "Token In").value).toBe(
             "Unknown (not named in the calldata)",
@@ -1722,7 +1792,7 @@ describe("uniswap decoder", () => {
             ],
             9999999999n,
         );
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(detail(result, "Token Out").value).toBe(
             "Unknown (not named in the calldata)",
         );
@@ -1756,7 +1826,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result.name).toBe("Swap USDT → USDC");
         expect(detail(result, "Token In").address).toBe(USDT_ADDR);
         expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
@@ -1780,7 +1850,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token In").value).toContain("USDT");
@@ -1811,7 +1881,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token Out").value).toContain("WETH");
@@ -1832,7 +1902,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token Out").value).toContain("USDC");
@@ -1851,7 +1921,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
 
         expect(detail(result, "Token Out").value).toContain("USDT");
@@ -1871,7 +1941,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         expect(result.name).toBe("Uniswap Swap");
 
@@ -1891,7 +1961,7 @@ describe("uniswap decoder", () => {
             9999999999n,
         );
 
-        const result = uniswap.decode(data, ROUTER_ADDR, "0x1");
+        const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(result).not.toBeNull();
         expect(result.name).toBe("Uniswap Swap");
 

tests/uniswapRecipient.test.js

@@ -0,0 +1,522 @@
+// The address a swap's output is paid to
+// (https://git.eeqj.de/sneak/AutistMask/issues/594).
+//
+// Every swap command, SWEEP, UNWRAP_WETH and V4 TAKE names the address it
+// pays, and the decoder read none of them: a swap whose output went to
+// another address still read "Min. received", as if the user received it. The
+// router reads address(1) as the caller and address(2) as the router itself,
+// which holds the output until a later step pays it out.
+//
+// The screens are driven against a minimal DOM stub in the shape
+// tests/uniswapRouterAddress.test.js uses.
+
+const { AbiCoder, Interface, solidityPacked } = require("ethers");
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    debugFetch: async (url) => ({
+        ok: true,
+        json: async () => mockExplorerAnswer(url),
+    }),
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const uniswap = require("../src/shared/uniswap");
+const { state } = require("../src/shared/state");
+const approval = require("../src/popup/views/approval");
+const transactionDetail = require("../src/popup/views/transactionDetail");
+
+// UniversalRouterV2 on Ethereum Mainnet.
+const ROUTER = "0x66a9893cc07d91d95644aedd05d03f95e1dba8af";
+const USER = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+const OTHER = "0x7777777777777777777777777777777777777777";
+const MSG_SENDER = "0x0000000000000000000000000000000000000001";
+const ADDRESS_THIS = "0x0000000000000000000000000000000000000002";
+const ZERO = "0x0000000000000000000000000000000000000000";
+
+const USDT = "0xdAC17F958D2ee523a2206206994597C13D831ec7";
+const USDC = "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48";
+const WETH = "0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2";
+const ONE_WETH = 1000000000000000000n;
+const USDT_2000 = 2000000000n;
+const USDC_1990 = 1990000000n;
+
+const coder = AbiCoder.defaultAbiCoder();
+const routerIface = new Interface([
+    "function execute(bytes commands, bytes[] inputs, uint256 deadline)",
+]);
+
+// execute() of `steps`, each [command, input].
+function execute(...steps) {
+    const commands = steps.map(([command]) => command);
+    return routerIface.encodeFunctionData("execute", [
+        solidityPacked(
+            commands.map(() => "uint8"),
+            commands,
+        ),
+        steps.map(([, input]) => input),
+        9999999999n,
+    ]);
+}
+
+// V2_SWAP_EXACT_IN (0x08) and V2_SWAP_EXACT_OUT (0x09) share one layout.
+function v2Swap(command, recipient, amount, limit, path) {
+    return [
+        command,
+        coder.encode(
+            ["address", "uint256", "uint256", "address[]", "bool"],
+            [recipient, amount, limit, path, true],
+        ),
+    ];
+}
+
+function v3SwapExactIn(recipient, amountIn, amountOutMin, tokenIn, tokenOut) {
+    return [
+        0x00,
+        coder.encode(
+            ["address", "uint256", "uint256", "bytes", "bool"],
+            [
+                recipient,
+                amountIn,
+                amountOutMin,
+                solidityPacked(
+                    ["address", "uint24", "address"],
+                    [tokenIn, 3000, tokenOut],
+                ),
+                true,
+            ],
+        ),
+    ];
+}
+
+function sweep(token, recipient) {
+    return [
+        0x04,
+        coder.encode(["address", "address", "uint256"], [token, recipient, 0n]),
+    ];
+}
+
+function wrapEth(recipient, amount) {
+    return [0x0b, coder.encode(["address", "uint256"], [recipient, amount])];
+}
+
+function unwrapWeth(recipient) {
+    return [0x0c, coder.encode(["address", "uint256"], [recipient, 0n])];
+}
+
+// The V4 actions a step below is built from.
+const SWAP_USDT_FOR_USDC = [
+    0x06, // SWAP_EXACT_IN_SINGLE
+    coder.encode(
+        [
+            "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
+        ],
+        [[[USDT, USDC, 100, 1, ZERO], true, USDT_2000, USDC_1990, "0x"]],
+    ),
+];
+const SETTLE_USDT = [
+    0x0b,
+    coder.encode(["address", "uint256", "bool"], [USDT, 0n, true]),
+];
+function take(currency, recipient) {
+    return [
+        0x0e,
+        coder.encode(
+            ["address", "address", "uint256"],
+            [currency, recipient, 0n],
+        ),
+    ];
+}
+function takeAll(currency) {
+    return [0x0f, coder.encode(["address", "uint256"], [currency, 0n])];
+}
+
+// A V4_SWAP step of `actions`, each [action, params].
+function v4Swap(...actions) {
+    return [
+        0x10,
+        coder.encode(
+            ["bytes", "bytes[]"],
+            [
+                solidityPacked(
+                    actions.map(() => "uint8"),
+                    actions.map(([action]) => action),
+                ),
+                actions.map(([, params]) => params),
+            ],
+        ),
+    ];
+}
+
+function decode(data, sender = USER) {
+    return uniswap.decode(data, ROUTER, "0x1", {}, sender);
+}
+
+function labels(result) {
+    return result.details.map((d) => d.label);
+}
+
+function detail(result, label) {
+    return result.details.find((d) => d.label === label);
+}
+
+function paidTo(result) {
+    return result.details
+        .filter((d) => d.label === "Paid to")
+        .map((d) => d.address.toLowerCase());
+}
+
+// A swap paid to the user, the lines it has always had.
+const PAID_TO_USER = [
+    "Protocol",
+    "Token In",
+    "Amount",
+    "Token Out",
+    "Min. received",
+    "Steps",
+    "Deadline",
+];
+const PAID_ELSEWHERE = [
+    "Protocol",
+    "Token In",
+    "Amount",
+    "Token Out",
+    "Paid to",
+    "Min. paid out",
+    "Steps",
+    "Deadline",
+];
+
+beforeEach(() => {
+    state.trackedTokens = [];
+    state.wallets = [];
+});
+
+describe("each swap command's recipient", () => {
+    test.each([
+        {
+            kind: "V2_SWAP_EXACT_IN",
+            data: (r) =>
+                execute(v2Swap(0x08, r, USDT_2000, ONE_WETH, [USDT, WETH])),
+            min: "1.0000 WETH",
+        },
+        {
+            kind: "V2_SWAP_EXACT_OUT",
+            data: (r) =>
+                execute(v2Swap(0x09, r, ONE_WETH, USDT_2000, [USDT, WETH])),
+            min: "1.0000 WETH",
+        },
+        {
+            kind: "V3_SWAP_EXACT_IN",
+            data: (r) =>
+                execute(v3SwapExactIn(r, USDT_2000, ONE_WETH, USDT, WETH)),
+            min: "1.0000 WETH",
+        },
+        {
+            kind: "V4_SWAP with TAKE",
+            data: (r) =>
+                execute(v4Swap(SWAP_USDT_FOR_USDC, SETTLE_USDT, take(USDC, r))),
+            min: "1990.0000 USDC",
+        },
+    ])(
+        "$kind: paid to the user it reads as before; paid to another address it names that address",
+        ({ data, min }) => {
+            const viaPlaceholder = decode(data(MSG_SENDER));
+            expect(labels(viaPlaceholder)).toEqual(PAID_TO_USER);
+            expect(detail(viaPlaceholder, "Min. received").value).toBe(min);
+            // The sender's own address, in any case, reads the same.
+            expect(decode(data(USER), USER.toLowerCase()).details).toEqual(
+                viaPlaceholder.details,
+            );
+
+            const toOther = decode(data(OTHER));
+            expect(labels(toOther)).toEqual(PAID_ELSEWHERE);
+            expect(paidTo(toOther)).toEqual([OTHER]);
+            expect(detail(toOther, "Min. paid out").value).toBe(min);
+        },
+    );
+});
+
+describe("an output the router holds", () => {
+    const toRouter = v3SwapExactIn(
+        ADDRESS_THIS,
+        USDT_2000,
+        USDC_1990,
+        USDT,
+        USDC,
+    );
+
+    test("SWEEP of the output token pays it to the SWEEP's recipient", () => {
+        const direct = decode(
+            execute(
+                v3SwapExactIn(MSG_SENDER, USDT_2000, USDC_1990, USDT, USDC),
+            ),
+        );
+        const toUser = decode(execute(toRouter, sweep(USDC, MSG_SENDER)));
+        expect(labels(toUser)).toEqual(PAID_TO_USER);
+        const withoutSteps = (r) =>
+            r.details.filter((d) => d.label !== "Steps");
+        expect(withoutSteps(toUser)).toEqual(withoutSteps(direct));
+
+        const toOther = decode(execute(toRouter, sweep(USDC, OTHER)));
+        expect(labels(toOther)).toEqual(PAID_ELSEWHERE);
+        expect(paidTo(toOther)).toEqual([OTHER]);
+        expect(detail(toOther, "Min. paid out").value).toBe("1990.0000 USDC");
+    });
+
+    test("is paid to the router when nothing pays it out", () => {
+        // A SWEEP of another token leaves it there.
+        for (const data of [
+            execute(toRouter),
+            execute(toRouter, sweep(USDT, MSG_SENDER)),
+        ]) {
+            const result = decode(data);
+            expect(labels(result)).toEqual(PAID_ELSEWHERE);
+            expect(paidTo(result)).toEqual([ROUTER]);
+        }
+    });
+
+    test("the router's own address as a recipient is read as address(2) is", () => {
+        const toRouterAddress = v3SwapExactIn(
+            ROUTER,
+            USDT_2000,
+            USDC_1990,
+            USDT,
+            USDC,
+        );
+        expect(paidTo(decode(execute(toRouterAddress)))).toEqual([ROUTER]);
+        expect(
+            labels(decode(execute(toRouterAddress, sweep(USDC, MSG_SENDER)))),
+        ).toEqual(PAID_TO_USER);
+    });
+
+    test("UNWRAP_WETH pays its WETH, as ETH, to the UNWRAP_WETH's recipient", () => {
+        const toWeth = v3SwapExactIn(
+            ADDRESS_THIS,
+            USDT_2000,
+            ONE_WETH,
+            USDT,
+            WETH,
+        );
+
+        const toUser = decode(execute(toWeth, unwrapWeth(MSG_SENDER)));
+        expect(labels(toUser)).toEqual(PAID_TO_USER);
+        expect(detail(toUser, "Token Out").value).toBe("ETH");
+        expect(detail(toUser, "Min. received").value).toBe("1.0000 ETH");
+
+        const toOther = decode(execute(toWeth, unwrapWeth(OTHER)));
+        expect(labels(toOther)).toEqual(PAID_ELSEWHERE);
+        expect(paidTo(toOther)).toEqual([OTHER]);
+        expect(detail(toOther, "Min. paid out").value).toBe("1.0000 ETH");
+    });
+
+    test("with no step setting the output, UNWRAP_WETH's recipient is paid the ETH", () => {
+        const wrap = wrapEth(ADDRESS_THIS, ONE_WETH);
+
+        const toUser = decode(execute(wrap, unwrapWeth(MSG_SENDER)));
+        expect(detail(toUser, "Token Out").value).toBe("ETH");
+        expect(paidTo(toUser)).toEqual([]);
+
+        const toOther = decode(execute(wrap, unwrapWeth(OTHER)));
+        expect(detail(toOther, "Token Out").value).toBe("ETH");
+        expect(paidTo(toOther)).toEqual([OTHER]);
+    });
+
+    test("a V4 TAKE to the router, then SWEEP, pays the SWEEP's recipient", () => {
+        const step = v4Swap(
+            SWAP_USDT_FOR_USDC,
+            SETTLE_USDT,
+            take(USDC, ADDRESS_THIS),
+        );
+
+        const toUser = decode(execute(step, sweep(USDC, MSG_SENDER)));
+        expect(labels(toUser)).toEqual(PAID_TO_USER);
+
+        const toOther = decode(execute(step, sweep(USDC, OTHER)));
+        expect(labels(toOther)).toEqual(PAID_ELSEWHERE);
+        expect(paidTo(toOther)).toEqual([OTHER]);
+    });
+});
+
+describe("several V4 takes of the output", () => {
+    test("TAKE_ALL pays the user; a TAKE to another address beside it names both", () => {
+        const toUser = decode(
+            execute(v4Swap(SWAP_USDT_FOR_USDC, SETTLE_USDT, takeAll(USDC))),
+        );
+        expect(labels(toUser)).toEqual(PAID_TO_USER);
+
+        // TAKE with an amount of zero takes the whole open credit, so
+        // TAKE_ALL after it pays the user nothing.
+        const split = decode(
+            execute(
+                v4Swap(
+                    SWAP_USDT_FOR_USDC,
+                    SETTLE_USDT,
+                    take(USDC, OTHER),
+                    takeAll(USDC),
+                ),
+            ),
+        );
+        expect(paidTo(split)).toEqual([OTHER, USER.toLowerCase()]);
+        expect(detail(split, "Min. received")).toBeUndefined();
+        expect(detail(split, "Min. paid out").value).toBe("1990.0000 USDC");
+    });
+});
+
+// The DOM stub both screens are drawn into.
+function makeElement(id) {
+    const classes = new Set();
+    const el = {
+        id,
+        textContent: "",
+        value: "",
+        innerHTML: "",
+        style: {},
+        dataset: {},
+        classList: {
+            add: (...names) => names.forEach((n) => classes.add(n)),
+            remove: (...names) => names.forEach((n) => classes.delete(n)),
+            contains: (n) => classes.has(n),
+            toggle: () => false,
+        },
+        addEventListener: () => {},
+        querySelectorAll: () => [],
+        appendChild: () => {},
+    };
+    Object.defineProperty(el, "parentElement", {
+        get: () => node(id + "-parent"),
+    });
+    return el;
+}
+
+function makeDocument() {
+    const els = new Map();
+    return {
+        getElementById(id) {
+            if (id === "debug-banner") return null;
+            if (!els.has(id)) els.set(id, makeElement(id));
+            return els.get(id);
+        },
+        createElement: () => makeElement("created"),
+        body: { prepend: () => {} },
+    };
+}
+
+function node(id) {
+    return globalThis.document.getElementById(id);
+}
+
+// A swap of 2,000 USDT for at least 1 WETH, paid to `recipient`.
+const swapPaidTo = (recipient) =>
+    execute(v3SwapExactIn(recipient, USDT_2000, ONE_WETH, USDT, WETH));
+
+// Open the approval screen for a transaction from USER sending `data` to the
+// router.
+async function showApproval(data) {
+    globalThis.document = makeDocument();
+    globalThis.window = { location: { search: "" }, close: () => {} };
+    globalThis.chrome.runtime = {
+        connect: () => ({ postMessage: () => {} }),
+        sendMessage: (_msg, reply) =>
+            reply({
+                type: "tx",
+                origin: "https://dapp.example",
+                isPhishingDomain: false,
+                approvedFrom: USER,
+                approvedTx: {
+                    type: 2,
+                    from: USER,
+                    chainId: "0x1",
+                    nonce: "0x7",
+                    gasLimit: "0x30d40",
+                    maxPriorityFeePerGas: "0x3b9aca00",
+                    maxFeePerGas: "0x77359400",
+                    to: ROUTER,
+                    value: "0x0",
+                    data,
+                    accessList: [],
+                },
+            }),
+    };
+    state.networkId = "mainnet";
+    state.currentView = null;
+    await approval.show(1);
+    return node("approve-tx-decoded-details").innerHTML;
+}
+
+// The transaction the explorer reports: from USER, sending `mockSentData` to
+// the router.
+const TX_HASH = "0x" + "5".repeat(64);
+let mockSentData = null;
+
+function mockExplorerAnswer(url) {
+    if (url.endsWith("/transactions/" + TX_HASH)) {
+        return {
+            from: { hash: USER },
+            to: { hash: ROUTER },
+            raw_input: mockSentData,
+            method: "execute",
+        };
+    }
+    return {};
+}
+
+// Open the transaction detail screen for that transaction, sending `data`.
+async function showDetail(data) {
+    mockSentData = data;
+    globalThis.document = makeDocument();
+    globalThis.window = { location: { search: "" } };
+    state.networkId = "mainnet";
+    state.blockscoutUrl = "https://explorer.example/api/v2";
+    state.viewData = {};
+    state.viewStack = [];
+    state.currentView = null;
+    transactionDetail.show({
+        hash: TX_HASH,
+        from: USER,
+        to: ROUTER,
+        value: "",
+        symbol: "ETH",
+        timestamp: 1790000000,
+        isError: false,
+        direction: "contract",
+        directionLabel: "Swap",
+        method: "execute",
+        chainId: "0x1",
+    });
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+    return node("tx-detail-calldata-details").innerHTML;
+}
+
+describe("the screens judge the output against the transaction's sender", () => {
+    test("the approval screen, against its From address", async () => {
+        const toUser = await showApproval(swapPaidTo(USER));
+        expect(toUser).toContain("Min. received");
+        expect(toUser).not.toContain("Paid to");
+
+        const toOther = await showApproval(swapPaidTo(OTHER));
+        expect(toOther).toContain("Paid to");
+        expect(toOther).toContain(OTHER);
+        expect(toOther).not.toContain("Min. received");
+    });
+
+    test("the transaction detail screen, against the sender the explorer reports", async () => {
+        const toUser = await showDetail(swapPaidTo(USER));
+        expect(toUser).toContain("Min. received");
+        expect(toUser).not.toContain("Paid to");
+
+        const toOther = await showDetail(swapPaidTo(OTHER));
+        expect(toOther).toContain("Paid to");
+        expect(toOther).not.toContain("Min. received");
+    });
+});

tests/uniswapTokenOut.test.js

@@ -53,7 +53,14 @@ function unwrapData() {
 }
 
 function detail(data, label, sources) {
-    const decoded = uniswap.decode(data, ROUTER, "0x1", sources || {});
+    // Sent by the address the swap pays, so the output is the user's.
+    const decoded = uniswap.decode(
+        data,
+        ROUTER,
+        "0x1",
+        sources || {},
+        RECIPIENT,
+    );
     return decoded.details.find((d) => d.label === label);
 }
 

tests/uniswapUndeterminedTokenOut.test.js

@@ -105,7 +105,7 @@ function v3ExactIn(tokenIn, tokenOut, amountIn, amountOutMin) {
 }
 
 function detail(data, label) {
-    const decoded = uniswap.decode(data, ROUTER, "0x1", {});
+    const decoded = uniswap.decode(data, ROUTER, "0x1", {}, USER);
     expect(decoded).not.toBeNull();
     return decoded.details.find((d) => d.label === label);
 }

tests/uniswapUnknownDecimals.test.js

@@ -82,7 +82,8 @@ function walletsHolding(token, decimals) {
 // decodeCalldata() rather than uniswap.decode() directly, because the scale
 // sources the screen supplies are part of what is under test.
 function swapDetail(data, label) {
-    const decoded = decodeCalldata(data, ROUTER, "0x1");
+    // Sent by the address the swap pays, so the output is the user's.
+    const decoded = decodeCalldata(data, ROUTER, "0x1", RECIPIENT);
     return decoded.details.find((d) => d.label === label);
 }