#!/bin/bash # # Postfix (SMTP) # -------------- # # Postfix handles the transmission of email between servers # using the SMTP protocol. It is a Mail Transfer Agent (MTA). # # Postfix listens on port 25 (SMTP) for incoming mail from # other servers on the Internet. It is responsible for very # basic email filtering such as by IP address and greylisting, # it checks that the destination address is valid, rewrites # destinations according to aliases, and passses email on to # another service for local mail delivery. # # The first hop in local mail delivery is to Spamassassin via # LMTP. Spamassassin then passes mail over to Dovecot for # storage in the user's mailbox. # # Postfix also listens on port 587 (SMTP+STARTLS) for # connections from users who can authenticate and then sends # their email out to the outside world. Postfix queries Dovecot # to authenticate users. # # Address validation, alias rewriting, and user authentication # is configured in a separate setup script mail-users.sh # because of the overlap of this part with the Dovecot # configuration. source setup/functions.sh # load our functions source /etc/mailinabox.conf # load global vars # ### Install packages. # Install postfix's packages. # # * `postfix`: The SMTP server. # * `postfix-pcre`: Enables header filtering. # * `postgrey`: A mail policy service that soft-rejects mail the first time # it is received. Spammers don't usually try agian. Legitimate mail # always will. # * `ca-certificates`: A trust store used to squelch postfix warnings about # untrusted opportunistically-encrypted connections. echo "Installing Postfix (SMTP server)..." apt_install postfix postfix-sqlite postfix-pcre postgrey ca-certificates # ### Basic Settings # Set some basic settings... # # * Have postfix listen on all network interfaces. # * Make outgoing connections on a particular interface (if multihomed) so that SPF passes on the receiving side. # * Set our name (the Debian default seems to be "localhost" but make it our hostname). # * Set the name of the local machine to localhost, which means xxx@localhost is delivered locally, although we don't use it. # * Set the SMTP banner (which must have the hostname first, then anything). tools/editconf.py /etc/postfix/main.cf \ inet_interfaces=all \ smtp_bind_address=$PRIVATE_IP \ smtp_bind_address6=$PRIVATE_IPV6 \ myhostname=$PRIMARY_HOSTNAME\ smtpd_banner="\$myhostname ESMTP Hi, I'm a Mail-in-a-Box (Ubuntu/Postfix; see https://mailinabox.email/)" \ mydestination=localhost # Tweak some queue settings: # * Inform users when their e-mail delivery is delayed more than 3 hours (default is not to warn). # * Stop trying to send an undeliverable e-mail after 2 days (instead of 5), and for bounce messages just try for 1 day. tools/editconf.py /etc/postfix/main.cf \ delay_warning_time=3h \ maximal_queue_lifetime=2d \ bounce_queue_lifetime=1d # ### Outgoing Mail # Enable the 'submission' port 587 smtpd server and tweak its settings. # # * Enable authentication. It's disabled globally so that it is disabled on port 25, # so we need to explicitly enable it here. # * Do not add the OpenDMAC Authentication-Results header. That should only be added # on incoming mail. Omit the OpenDMARC milter by re-setting smtpd_milters to the # OpenDKIM milter only. See dkim.sh. # * Even though we dont allow auth over non-TLS connections (smtpd_tls_auth_only below, and without auth the client cant # send outbound mail), don't allow non-TLS mail submission on this port anyway to prevent accidental misconfiguration. # Setting smtpd_tls_security_level=encrypt also triggers the use of the 'mandatory' settings below. # * Give it a different name in syslog to distinguish it from the port 25 smtpd server. # * Add a new cleanup service specific to the submission service ('authclean') # that filters out privacy-sensitive headers on mail being sent out by # authenticated users. By default Postfix also applies this to attached # emails but we turn this off by setting nested_header_checks empty. tools/editconf.py /etc/postfix/master.cf -s -w \ "submission=inet n - - - - smtpd -o smtpd_sasl_auth_enable=yes -o syslog_name=postfix/submission -o smtpd_milters=inet:127.0.0.1:8891 -o smtpd_tls_security_level=encrypt -o cleanup_service_name=authclean" \ "authclean=unix n - - - 0 cleanup -o header_checks=pcre:/etc/postfix/outgoing_mail_header_filters -o nested_header_checks=" # Install the `outgoing_mail_header_filters` file required by the new 'authclean' service. cp conf/postfix_outgoing_mail_header_filters /etc/postfix/outgoing_mail_header_filters # Modify the `outgoing_mail_header_filters` file to use the local machine name and ip # on the first received header line. This may help reduce the spam score of email by # removing the 127.0.0.1 reference. sed -i "s/PRIMARY_HOSTNAME/$PRIMARY_HOSTNAME/" /etc/postfix/outgoing_mail_header_filters sed -i "s/PUBLIC_IP/$PUBLIC_IP/" /etc/postfix/outgoing_mail_header_filters # Enable TLS on incoming connections. It is not required on port 25, allowing for opportunistic # encryption. On port 587 it is mandatory (see above). Shared and non-shared settings are # given here. Shared settings include: # * Require TLS before a user is allowed to authenticate. # * Set the path to the server TLS certificate and 2048-bit DH parameters for old DH ciphers. # For port 25 only: # * Disable extremely old versions of TLS and extremely unsafe ciphers, but some mail servers out in # the world are very far behind and if we disable too much, they may not be able to use TLS and # won't fall back to cleartext. So we don't disable too much. smtpd_tls_exclude_ciphers applies to # both port 25 and port 587, but because we override the cipher list for both, it probably isn't used. # Use Mozilla's "Old" recommendations at https://ssl-config.mozilla.org/#server=postfix&server-version=3.3.0&config=old&openssl-version=1.1.1 # For port 587 (via the 'mandatory' settings): # * Use Mozilla's "Intermediate" TLS recommendations from https://ssl-config.mozilla.org/#server=postfix&server-version=3.3.0&config=intermediate&openssl-version=1.1.1 # using and overriding the "high" cipher list so we don't conflict with the more permissive settings for port 25. tools/editconf.py /etc/postfix/main.cf \ smtpd_tls_security_level=may\ smtpd_tls_auth_only=yes \ smtpd_tls_cert_file=$STORAGE_ROOT/ssl/ssl_certificate.pem \ smtpd_tls_key_file=$STORAGE_ROOT/ssl/ssl_private_key.pem \ smtpd_tls_dh1024_param_file=$STORAGE_ROOT/ssl/dh2048.pem \ smtpd_tls_protocols="!SSLv2,!SSLv3" \ smtpd_tls_ciphers=medium \ tls_medium_cipherlist=ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA \ smtpd_tls_exclude_ciphers=aNULL,RC4 \ smtpd_tls_mandatory_protocols="!SSLv2,!SSLv3,!TLSv1,!TLSv1.1" \ smtpd_tls_mandatory_ciphers=high \ tls_high_cipherlist=ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384 \ smtpd_tls_mandatory_exclude_ciphers=aNULL,DES,3DES,MD5,DES+MD5,RC4 \ tls_preempt_cipherlist=no \ smtpd_tls_received_header=yes # Prevent non-authenticated users from sending mail that requires being # relayed elsewhere. We don't want to be an "open relay". On outbound # mail, require one of: # # * `permit_sasl_authenticated`: Authenticated users (i.e. on port 587). # * `permit_mynetworks`: Mail that originates locally. # * `reject_unauth_destination`: No one else. (Permits mail whose destination is local and rejects other mail.) tools/editconf.py /etc/postfix/main.cf \ smtpd_relay_restrictions=permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination # ### DANE # When connecting to remote SMTP servers, prefer TLS and use DANE if available. # # Prefering ("opportunistic") TLS means Postfix will use TLS if the remote end # offers it, otherwise it will transmit the message in the clear. Postfix will # accept whatever SSL certificate the remote end provides. Opportunistic TLS # protects against passive easvesdropping (but not man-in-the-middle attacks). # Since we'd rather have poor encryption than none at all, we use Mozilla's # "Old" recommendations at https://ssl-config.mozilla.org/#server=postfix&server-version=3.3.0&config=old&openssl-version=1.1.1 # for opportunistic encryption but "Intermediate" recommendations when DANE # is used (see next and above). The cipher lists are set above. # DANE takes this a step further: # Postfix queries DNS for the TLSA record on the destination MX host. If no TLSA records are found, # then opportunistic TLS is used. Otherwise the server certificate must match the TLSA records # or else the mail bounces. TLSA also requires DNSSEC on the MX host. Postfix doesn't do DNSSEC # itself but assumes the system's nameserver does and reports DNSSEC status. Thus this also # relies on our local DNS server (see system.sh) and `smtp_dns_support_level=dnssec`. # # The `smtp_tls_CAfile` is superflous, but it eliminates warnings in the logs about untrusted certs, # which we don't care about seeing because Postfix is doing opportunistic TLS anyway. Better to encrypt, # even if we don't know if it's to the right party, than to not encrypt at all. Instead we'll # now see notices about trusted certs. The CA file is provided by the package `ca-certificates`. tools/editconf.py /etc/postfix/main.cf \ smtp_tls_protocols=\!SSLv2,\!SSLv3 \ smtp_tls_ciphers=medium \ smtp_tls_exclude_ciphers=aNULL,RC4 \ smtp_tls_security_level=dane \ smtp_dns_support_level=dnssec \ smtp_tls_mandatory_protocols="!SSLv2,!SSLv3,!TLSv1,!TLSv1.1" \ smtp_tls_mandatory_ciphers=high \ smtp_tls_CAfile=/etc/ssl/certs/ca-certificates.crt \ smtp_tls_loglevel=2 # ### Incoming Mail # Pass any incoming mail over to a local delivery agent. Spamassassin # will act as the LDA agent at first. It is listening on port 10025 # with LMTP. Spamassassin will pass the mail over to Dovecot after. # # In a basic setup we would pass mail directly to Dovecot by setting # virtual_transport to `lmtp:unix:private/dovecot-lmtp`. tools/editconf.py /etc/postfix/main.cf "virtual_transport=lmtp:[127.0.0.1]:10025" # Because of a spampd bug, limit the number of recipients in each connection. # See https://github.com/mail-in-a-box/mailinabox/issues/1523. tools/editconf.py /etc/postfix/main.cf lmtp_destination_recipient_limit=1 # Who can send mail to us? Some basic filters. # # * `reject_non_fqdn_sender`: Reject not-nice-looking return paths. # * `reject_unknown_sender_domain`: Reject return paths with invalid domains. # * `reject_authenticated_sender_login_mismatch`: Reject if mail FROM address does not match the client SASL login # * `reject_rhsbl_sender`: Reject return paths that use blacklisted domains. # * `permit_sasl_authenticated`: Authenticated users (i.e. on port 587) can skip further checks. # * `permit_mynetworks`: Mail that originates locally can skip further checks. # * `reject_rbl_client`: Reject connections from IP addresses blacklisted in zen.spamhaus.org # * `reject_unlisted_recipient`: Although Postfix will reject mail to unknown recipients, it's nicer to reject such mail ahead of greylisting rather than after. # * `check_policy_service`: Apply greylisting using postgrey. # # Notes: #NODOC # permit_dnswl_client can pass through mail from whitelisted IP addresses, which would be good to put before greylisting #NODOC # so these IPs get mail delivered quickly. But when an IP is not listed in the permit_dnswl_client list (i.e. it is not #NODOC # whitelisted) then postfix does a DEFER_IF_REJECT, which results in all "unknown user" sorts of messages turning into #NODOC # "450 4.7.1 Client host rejected: Service unavailable". This is a retry code, so the mail doesn't properly bounce. #NODOC tools/editconf.py /etc/postfix/main.cf \ smtpd_sender_restrictions="reject_non_fqdn_sender,reject_unknown_sender_domain,reject_authenticated_sender_login_mismatch,reject_rhsbl_sender dbl.spamhaus.org" \ smtpd_recipient_restrictions=permit_sasl_authenticated,permit_mynetworks,"reject_rbl_client zen.spamhaus.org",reject_unlisted_recipient,"check_policy_service inet:127.0.0.1:10023" # Postfix connects to Postgrey on the 127.0.0.1 interface specifically. Ensure that # Postgrey listens on the same interface (and not IPv6, for instance). # A lot of legit mail servers try to resend before 300 seconds. # As a matter of fact RFC is not strict about retry timer so postfix and # other MTA have their own intervals. To fix the problem of receiving # e-mails really latter, delay of greylisting has been set to # 180 seconds (default is 300 seconds). tools/editconf.py /etc/default/postgrey \ POSTGREY_OPTS=\"'--inet=127.0.0.1:10023 --delay=180'\" # We are going to setup a newer whitelist for postgrey, the version included in the distribution is old cat > /etc/cron.daily/mailinabox-postgrey-whitelist << EOF; #!/bin/bash # Mail-in-a-Box # check we have a postgrey_whitelist_clients file and that it is not older than 28 days if [ ! -f /etc/postgrey/whitelist_clients ] || find /etc/postgrey/whitelist_clients -mtime +28 | grep -q '.' ; then # ok we need to update the file, so lets try to fetch it if curl https://postgrey.schweikert.ch/pub/postgrey_whitelist_clients --output /tmp/postgrey_whitelist_clients -sS --fail > /dev/null 2>&1 ; then # if fetching hasn't failed yet then check it is a plain text file # curl manual states that --fail sometimes still produces output # this final check will at least check the output is not html # before moving it into place if [ "\$(file -b --mime-type /tmp/postgrey_whitelist_clients)" == "text/plain" ]; then mv /tmp/postgrey_whitelist_clients /etc/postgrey/whitelist_clients service postgrey restart else rm /tmp/postgrey_whitelist_clients fi fi fi EOF chmod +x /etc/cron.daily/mailinabox-postgrey-whitelist /etc/cron.daily/mailinabox-postgrey-whitelist # Increase the message size limit from 10MB to 128MB. # The same limit is specified in nginx.conf for mail submitted via webmail and Z-Push. tools/editconf.py /etc/postfix/main.cf \ message_size_limit=134217728 # Allow the two SMTP ports in the firewall. ufw_allow smtp ufw_allow submission # Restart services restart_service postfix restart_service postgrey